TerraTec Home Cinema 6

Anzeige

AW: TerraTec Home Cinema 6

Cinergy Cinergy C PCI HD CI drivers(treiber),
sluit windows vista af na 20 seconden is veel te lang.
Het programma kan niet goed hd kanalen weergeven(rucklen) vooral h.264 kanalen.
Heb er spijt van dat ik mijn floppyb dtv c heb verkocht.
Dit is dus helemaal niks...
Duitse grundlichket dacht het niet...
Een zeer ontevreden klant:wüt:

 

AW: TerraTec Home Cinema 6

hmmm, also die ersten drei Sätze verstehe ich noch, aber das danach...

Das mit dem HD kann auch an deiner Hardware liegen. Hast du eine Starke CPU oder eine Grafikkarte, die HD-Beschleunigung unterstützt? Bei mir läuft HD nämlich mit Terratec. Es gibt nur die "normalen" THC Aussetzer alle paar Minuten.

 

AW: TerraTec Home Cinema 6

Since this forum is german it is likely that most people don't understand dutch. I will try to translate what you were saying as far as my münsterländer-platt helps me with that. I'm doing this in english since most people from the netherlands can do english but not german.

I think he speaks of his Windows Vista drivers for his Cinergy C PCI HD CI. He feels that the process of closing THC is much too long, speaking of 20 seconds. He also reports that THC plays HD channels (esp. H.264) bucking. Then it gets a little difficult. I think he posessed a Floppy DTV DVB-C card, which burned in his case. Cause of the so said german thoroughness he then chose to buy a Terratec card, but now is quite unhappy expressing that by signing with "a very unsatisfied customer".

For helping you it could be useful to know what your system is like. Tell us about your graphics card, cpu, ram and so on. Do you use hardware acceleration for h.264?

 

AW: TerraTec Home Cinema 6

How can i say this HD h.264 channels are flimmering HD cannels mpeg hd channels no problem.
Windows vista 32 bit takes 20 seconds to reboot with the terratec drivers, screen goes black gor 20 seconds.
Tried with ore without hardware acc but nohting helps.
Keeping me busy for 3 weeks.
And yes i dit sold my floppy dtv

Intel Core 2 Quad Q6600 2.40Ghz
Ram 4 GB
Nvidia Gforce 9600 GT

 

AW: TerraTec Home Cinema 6

The drivers are good running windows 7 7137.
No more reboot problems but the home cinema program still sucks.
Flimmering on h264 hd channels stil occurs.
With dvbviewer no problems.
And why can we use ather codec's in home cinema center, only cyberlink codec's.
It will solve a lot off problems.

 

AW: TerraTec Home Cinema 6

Sorry if you German's are hardheaded but terratec home cinema sucks big.
The pci card is good but the software sucks.
No answere's are giving to me and yes a give system specs but nothing's done with it.
Never visit this forum again.
Shame one you...
ps Never buy a terratec product again....

 

AW: TerraTec Home Cinema 6

Remember that it's weekend. If I was working with Terratec I wouldn't touch this forum in my free time either.

Btw. you should be able to use different codecs as long as they are correctly registered within Windows. May be you should check that.
Regarding that flimmering: Have you tried different renderers (Overlay, VMR, EVR...)? What about your graphics driver? Is that flimmering different when you record a H.264 film and play it from your diskdrive?

 

AW: TerraTec Home Cinema 6

You can wait, until you are an old man.... I sent my Trace.log in the middle of last month and I didn´t get an answer until today. Look at this thread:
http://forum.digitalfernsehen.de/fo...-5-125-legt-den-rechner-lahm.html#post3366958
The software is buggy and the stick ( I use the USB Hybrid XE) is too expensive for to use only the dvb-t function with VMC. Since many month always problems. Only ev´ry second or first start of the pc THC runs, the other time the software let my PC hang up.

 

AW: TerraTec Home Cinema 6

Only H.264 channels are flimmering (Rucklen) the first 3 minutes are ok but after that time it begins.
Vmr Evr tried all of them nothing helps and the program does not want to work white FDDshow.
under windows xp vista and even windows 7 the same problems..
Basic I/O System(BIOS): Default System BIOS
Central Processing Unit(CPU): Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz
Physical Memory X 4
1GB
1GB
1GB
1GB
Hard Disk X 2
OCZ CORE_SSD ATA Device (59,7GB)
SAMSUNG HD642JJ ATA Device (596,17GB)
Video Card: NVIDIA GeForce 9600 GT
Monitor: SyncMaster T240,SyncMaster Magic T240(Digital)
Audio Device: Z Cinéma with TruSurround HD
Network Adapter
LAN-verbinding - Realtek RTL8168B/8111B Family PCI-E Gigabit Ethernet NIC (NDIS 6.0) (Connected)
Keyboard: HID-toetsenbordapparaat
Keyboard: USB-HID
Keyboard: USB-HID
Keyboard: HID-toetsenbordapparaat
Keyboard: HID-toetsenbordapparaat
Mouse: Microsoft USB Wireless Mouse (IntelliPoint)
Hardware Score (Base score: 5,6)
Processor (Calculations per second): 5,9
Memory (Memory Operation per second): 5,6
Graphics (Desktop performance for Windows Aero): 5,9
Gaming graphics (3D business and gaming graphics performance): 5,9
Primary hard disk (Disk data transfer rate): 5,9

 

AW: TerraTec Home Cinema 6

Please use DVBviewer to look how it must be only with FFdshow.
Looks perfect.