1. Cookies optimieren die Bereitstellung unserer Dienste. Mit der Nutzung unserer Dienste erklärst Du dich damit einverstanden, dass wir Cookies verwenden. Weitere Informationen
    Information ausblenden
  2. Willkommen im Forum von DIGITAL FERNSEHEN - dem führenden Portal für digitales Fernsehen, Medien und Entertainment. Wenn du hier neu bist, schau dich ruhig etwas um und melde dich an, um am Forengeschehen teilnehmen zu können.
    Information ausblenden

Sport Portal weg!

Dieses Thema im Forum "d-box 1 und d-box 2" wurde erstellt von Grisu01, 14. April 2006.

  1. hopper

    hopper Lexikon

    Registriert seit:
    3. April 2003
    Beiträge:
    20.842
    Zustimmungen:
    1
    Punkte für Erfolge:
    48
    Anzeige
    AW: Sport Portal weg!

    Mach mal ein Bootlog beim Umschalten...
     
  2. Grisu01

    Grisu01 Junior Member

    Registriert seit:
    5. November 2004
    Beiträge:
    56
    Zustimmungen:
    0
    Punkte für Erfolge:
    16
    AW: Sport Portal weg!

    Sorry,
    jetzt kommt das unvermeidliche.
    Wie mache ich einen Bootlog?
     
  3. hopper

    hopper Lexikon

    Registriert seit:
    3. April 2003
    Beiträge:
    20.842
    Zustimmungen:
    1
    Punkte für Erfolge:
    48
  4. Kevin911

    Kevin911 Neuling

    Registriert seit:
    14. April 2006
    Beiträge:
    3
    Zustimmungen:
    0
    Punkte für Erfolge:
    1
    AW: Sport Portal weg!

    @Grisu01: Gehts bei dir schon wieder?
    Wenn ja, wie hast du es gemacht?
     
  5. Grisu01

    Grisu01 Junior Member

    Registriert seit:
    5. November 2004
    Beiträge:
    56
    Zustimmungen:
    0
    Punkte für Erfolge:
    16
    AW: Sport Portal weg!

    Sorry,
    die familieären Osterpflichten haben mich zurückgeworfen.
    Komme gerade vollgefressen von den Schwiegerleuten wieder.

    Aber:

    Habe die DBox zu meinem Schwiegervater mitgenommen und dort ans Kabel
    angeschlossen, gleicher Effekt kein Sport Portal.
    Liegt also eindeutig an der Box. Kann also den KD Mann abbestellen.

    Bootlog habe ich noch nicht gemacht.

    Habe aber schon einiges über das Kanal nicht verfügbar Problem gelesen.

    Melde mich wieder.

    Gruss
    Grisu
     
  6. Grisu01

    Grisu01 Junior Member

    Registriert seit:
    5. November 2004
    Beiträge:
    56
    Zustimmungen:
    0
    Punkte für Erfolge:
    16
    AW: Sport Portal weg!

    Hallo Leute,

    hier kommt das Bootlog (Komplettes booten Teil 1 umschalten kommt gleich):

    ~debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
    debug: BMon V1.0 mID 01
    debug: feID 7a gtxID 0b
    debug: fpID 5a dsID 01-xx.xx.xx.xx.xx.xx-xx
    debug: HWrev X5 SWrev 0.81
    debug: B/Ex/Fl(MB) 32/00/08
    WATCHDOG reset enabled
    dbox2:root> debug:
    BOOTP/TFTP bootstrap loader (v0.3)
    debug:
    debug: Transmitting BOOTP request via broadcast
    debug: Given up BOOTP/TFTP boot
    boot net failed

    Flash-FS bootstrap loader (v1.5)

    Found Flash-FS superblock version 3.1
    Found file /root/platform/nokia-dbox2/kernel/os in Flash-FS
    debug: Got Block #0036

    will verify ELF image, start= 0x800000, size= 160940
    verify sig: 263
    Branching to 0x40000


    U-Boot 1.1.2 (Tuxbox) (May 26 2005 - 16:37:05)

    CPU: PPC823ZTnnA at 67.200 MHz: 2 kB I-Cache 1 kB D-Cache
    *** Warning: CPU Core has Silicon Bugs -- Check the Errata ***
    Board: DBOX2, Nokia, BMon V1.0
    Watchdog enabled
    I2C: ready
    DRAM: 32 MB
    FLASH: 8 MB
    Scanning JFFS2 FS: . done.
    FB: ready
    LCD: ready
    In: serial
    Out: serial
    Err: serial
    Net: SCC ETHERNET

    Options:
    1: Console on null
    2: Console on ttyS0
    3: Console on framebuffer
    Select option (1-3), other keys to stop autoboot: 0
    ### FS (squashfs) loading 'vmlinuz' to 0x100000
    ### FS load complete: 666412 bytes loaded to 0x100000
    ...............................................................
    Un-Protected 63 sectors
    ## Booting image at 00100000 ...
    Image Name: dbox2
    Image Type: PowerPC Linux Kernel Image (gzip compressed)
    Data Size: 666348 Bytes = 650.7 kB
    Load Address: 00000000
    Entry Point: 00000000
    Verifying Checksum ... OK
    Uncompressing Kernel Image ... OK
    Linux version 2.4.31-dbox2 (ImageTeam@yadi.org) (gcc version 3.4.4) #2 So Nov 6
    23:15:50 CET 2005
    On node 0 totalpages: 8192
    zone(0): 8192 pages.
    zone(1): 0 pages.
    zone(2): 0 pages.
    Kernel command line: console=ttyS0 root=/dev/mtdblock1 rootfstype=squashfs
    Decrementer Frequency = 252000000/60
    m8xx_wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)
    m8xx_wdt: keep-alive trigger installed (PITC: 0x12C0)
    Console: colour dummy device 80x25
    Calibrating delay loop... 66.96 BogoMIPS
    Memory: 30832k available (1132k kernel code, 344k data, 60k init, 0k highmem)
    Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
    Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
    Mount cache hash table entries: 512 (order: 0, 4096 bytes)
    Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
    Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
    POSIX conformance testing by UNIFIX
    Linux NET4.0 for Linux 2.4
    Based upon Swansea University Computer Society NET3.039
    Initializing RT netlink socket
    Starting kswapd
    devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
    devfs: boot_options: 0x1
    JFFS2 version 2.2. (NAND) (C) 2001-2003 Red Hat, Inc.
    Squashfs 2.2-r2 (released 2005/09/08) (C) 2002-2005 Phillip Lougher
    i2c-core.o: i2c core module version 2.6.1 (20010830)
    i2c-dev.o: i2c /dev entries driver module version 2.6.1 (20010830)
    CPM UART driver version 0.04
    ttyS0 at 0x0280 is on SMC1 using BRGttyS1 at 0x0380 is on SMC2 using BRG2
    pty: 256 Unix98 ptys configured
    eth0: CPM ENET Version 0.2.dbox2 on SCC2, 00:50:9c:1e:8f:cb
    loop: loaded (max 8 devices)
    D-Box 2 flash driver (size->0x800000 mem->0x10000000)
    D-Box 2 flash memory: Found 2 x16 devices at 0x0 in 32-bit bank
    Intel/Sharp Extended Query Table at 0x0035
    cfi_cmdset_0001: Erase suspend on write enabled
    Creating 6 MTD partitions on "D-Box 2 flash memory":
    0x00000000-0x00020000 : "BR bootloader"
    0x00020000-0x00680000 : "root (squashfs)"
    0x00680000-0x007e0000 : "var (jffs2)"
    0x007e0000-0x00800000 : "flfs (u-boot)"
    0x00020000-0x00800000 : "Flash without bootloader"
    0x00000000-0x00800000 : "Complete Flash"
    Linux video capture interface: v1.00
    mice: PS/2 mouse device common for all mice
    NET4: Linux TCP/IP 1.0 for NET4.0
    IP Protocols: ICMP, UDP, TCP, IGMP
    IP: routing cache hash table of 512 buckets, 4Kbytes
    TCP: Hash tables configured (established 2048 bind 4096)
    Linux IP multicast router 0.06 plus PIM-SM
    NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
    VFS: Mounted root (squashfs filesystem) readonly.
    Mounted devfs on /dev
    Freeing unused kernel memory: 60k init
    Starting pid 10, console /dev/console: '/etc/init.d/rcS'ti-call b
    Using /lib/modules/2.4.31-dbox2/misc/event.o
    event: $Id: event.c,v 1.12 2003/09/30 05:45:38 obi Exp $
    Using /lib/modules/2.4.31-dbox2/misc/tuxbox.o
    Using /lib/modules/2.4.31-dbox2/misc/dvb-core.o
    Using /lib/modules/2.4.31-dbox2/misc/dbox2_i2c.o
    [i2c-8xx]: mpc 8xx i2c init
    [i2c-8xx]: adapter: 0
    Using /lib/modules/2.4.31-dbox2/misc/dbox2_fp.o
    Using /lib/modules/2.4.31-dbox2/misc/dbox2_fp_input.o
    Using /lib/modules/2.4.31-dbox2/misc/avs.o
    Using /lib/modules/2.4.31-dbox2/misc/saa7126.o
    Detected STB:
    Vendor: Nokia
    Model: D-BOX2
    Using /lib/modules/2.4.31-dbox2/misc/cam.o
    $Id: cam.c,v 1.30 2004/01/10 16:36:34 alexw Exp $
    Using /lib/modules/2.4.31-dbox2/misc/dvb_i2c_bridge.o
    Using /lib/modules/2.4.31-dbox2/misc/avia_napi.o
    $Id: avia_napi.c,v 1.18 2003/11/24 09:53:01 obi Exp $
    DVB: registering new adapter (C-Cube AViA GTX/eNX with AViA 500/600).
    dvb_i2c_bridge: enabled DVB i2c bridge to PowerPC 8xx I2C adapter
    Using /lib/modules/2.4.31-dbox2/misc/cam_napi.o
    $Id: cam_napi.c,v 1.8 2003/09/30 05:45:34 obi Exp $
    Using /lib/modules/2.4.31-dbox2/misc/dbox2_fp_napi.o
    Thu Jan 1 01:00:00 CET 1970
    Using /lib/modules/2.4.31-dbox2/misc/avia_av.o
    avia_av: $Id: avia_av_core.c,v 1.98 2004/11/21 20:33:38 carjay Exp $
    avia_av_event: $Id: avia_av_event.c,v 1.11 2003/10/26 16:32:51 obi Exp $
    avia_av_proc: $Id: avia_av_proc.c,v 1.14 2004/01/21 20:02:29 carjay Exp $
    Using /lib/modules/2.4.31-dbox2/misc/avia_gt.o
    avia_gt_core: $Id: avia_gt_core.c,v 1.48 2004/12/20 01:01:22 carjay Exp $
    avia_gt_core: autodetecting chip type... GTX
    avia_gt_gtx: $Id: avia_gt_gtx.c,v 1.24 2003/09/30 05:45:35 obi Exp $
    avia_gt_accel: $Id: avia_gt_accel.c,v 1.19 2003/09/30 05:45:35 obi Exp $
    avia_gt_dmx: $Id: avia_gt_dmx.c,v 1.210 2004/06/26 16:08:15 carjay Exp $
    avia_gt_core: masking unhandled irq reg 1 bit 11
    avia_gt_core: masking unhandled irq reg 1 bit 13
    avia_gt_ucode: loaded ucode vB107
    avia_gt_ucode: ucode section filters disabled.
    avia_gt_core: masking unhandled irq reg 0 bit 6
    avia_gt_dmx: warning, misaligned queue 0 (is 0xFD200, size 65536), aligning...
    avia_gt_gv: $Id: avia_gt_gv.c,v 1.39 2004/08/28 16:44:56 carjay Exp $
    avia_gt_gv: set_input_size (width=720, height=576)
    avia_gt_pcm: $Id: avia_gt_pcm.c,v 1.29 2004/01/29 19:38:20 zwen Exp $
    avia_gt_pcm_set_rate(44100)
    avia_gt_capture: $Id: avia_gt_capture.c,v 1.32 2003/09/30 05:45:35 obi Exp $
    avia_gt_pig: $Id: avia_gt_pig.c,v 1.40 2003/09/30 05:45:35 obi Exp $
    avia_gt_vbi: $Id: avia_gt_vbi.c,v 1.26 2003/08/01 17:31:22 obi Exp $
    avia_gt_core: Loaded AViA eNX/GTX driver
     
    Zuletzt von einem Moderator bearbeitet: 19. April 2006
  7. Grisu01

    Grisu01 Junior Member

    Registriert seit:
    5. November 2004
    Beiträge:
    56
    Zustimmungen:
    0
    Punkte für Erfolge:
    16
    AW: Sport Portal weg!

    Teil2:
    Using /lib/modules/2.4.31-dbox2/misc/avia_gt_fb.o
    avia_gt_fb: $Id: avia_gt_fb_core.c,v 1.54 2004/03/17 18:42:18 zwen Exp $
    avia_gt_gv: set_input_mode (mode=2)
    avia_gt_gv: set_input_size (width=720, height=576)
    avia_gt_gv: set_input_mode (mode=2)
    avia_gt_gv: set_input_size (width=720, height=576)
    avia_gt_gv: set_input_mode (mode=2)
    avia_gt_gv: set_input_size (width=720, height=576)
    Console: switching to colour frame buffer device 82x32
    avia_gt_fb: fb0: AViA eNX/GTX Framebuffer frame buffer device
    Using /lib/modules/2.4.31-dbox2/misc/lcd.o
    lcd.o: init lcd driver module
    lcd.o: found KS0713/SED153X lcd interface
    Using /lib/modules/2.4.31-dbox2/misc/avia_gt_lirc.o
    avia_gt_lirc: $Id: avia_gt_lirc.c,v 1.14 2003/09/30 05:45:35 obi Exp $
    avia_gt_ir: $Id: avia_gt_ir.c,v 1.30 2003/09/30 05:45:35 obi Exp $
    Using /lib/modules/2.4.31-dbox2/misc/avia_gt_oss.o
    avia_oss: $Id: avia_gt_oss.c,v 1.26 2004/05/31 22:56:02 carjay Exp $
    avia_gt_pcm_set_rate(44100)
    Using /lib/modules/2.4.31-dbox2/misc/avia_gt_v4l2.o
    avia_gt_v4l2: $Id: avia_gt_v4l2.c,v 1.12 2003/09/30 04:54:03 obi Exp $
    Using /lib/modules/2.4.31-dbox2/misc/ves1820.o
    DVB: VES1820(0): pwm=0x48
    DVB: registering frontend 0:0 (VES1820 based DVB-C frontend)...
    Using /lib/modules/2.4.31-dbox2/misc/ves1x93.o
    Using /lib/modules/2.4.31-dbox2/misc/avia_av_napi.o
    avia_av_napi.c: $Id: avia_av_napi.c,v 1.33 2004/03/11 15:30:27 derget Exp $
    Using /lib/modules/2.4.31-dbox2/misc/avia_gt_napi.o
    avia_gt_napi: $Id: avia_gt_napi.c,v 1.203 2005/01/05 05:49:56 carjay Exp $
    Using /lib/modules/2.4.31-dbox2/misc/dvb2eth.o
    Using /lib/modules/2.4.31-dbox2/misc/aviaEXT.o
    Using /lib/modules/2.4.31-dbox2/kernel/net/sunrpc/sunrpc.o
    $Id: chkIVersion.cpp,v 1.8 2005/09/14 21:55:37 mogway Exp $
    Yadi Snapshot vom 06.11.2005 21:57 - Image-Version 2.1.0.8
    Networkcfg eth0: 192.168.1.35/255.255.255.0 gw 192.168.1.1 ns 192.168.1.1
    Startmode: Bootmenu - HWS: off
    Using /lib/modules/2.4.31-dbox2/kernel/fs/lockd/lockd.o
    Using /lib/modules/2.4.31-dbox2/kernel/fs/nfs/nfs.o
    Using /lib/modules/2.4.31-dbox2/kernel/fs/cifs/cifs.o
    Starting pid 96, console /dev/console: '/etc/init.d/start'

    Please press Enter to activate this console. $Id: sectionsd.cpp,v 1.194 2005/11/
    03 21:08:51 mogway Exp $
    caching 504 hours
    events are old 180min after their end time
    [camd] ca system id: 1722
    $Id: zapit.cpp,v 1.375 2005/10/01 00:05:14 racker Exp $
    [zapit] PMT update enabled
    avia_gt_core: masking unhandled irq reg 0 bit 7
    [getservices] /var/tuxbox/config/zapit/myservices.xml found.
    [camd] no card is in slot #2
    [camd] a card is in slot #1
    $Id: controld.cpp,v 1.117 2004/05/22 14:34:09 carjay Exp $

    [controld] Boxtype detected: (1, Nokia D-BOX2)
    [controld] setting VideoFormat to auto
    [nhttpd] Neutrino HTTP-Server starting..
    [LCDFONT] initializing core...
    [LCDFONT] adding font /share/fonts/micron.ttf...OK (Micron/Regular)
    [LCDFONT] adding font /share/fonts/micron_bold.ttf...OK (Micron/Bold)
    [LCDFONT] adding font /share/fonts/pakenham.ttf...OK (Pakenham/Regular)
    [LCDFONT] Intializing font cache...
    [camd] no card is in slot #2
    [camd] a card is in slot #1
    [camd] no card is in slot #2
    [camd] a card is in slot #1
    [neutrino] frameBuffer Instance created
    812k video mem
    avia_gt_gv: set_input_mode (mode=2)
    avia_gt_gv: set_input_size (width=720, height=576)
    [neutrino] Software update enabled
    [neutrino] enable flash
    [lcdd] time-skin not found -> using default...
    [lcdd] weekday-skin not found -> using default...
    [lcdd] date-skin not found -> using default...
    [lcdd] month-skin not found -> using default...
    [LCDFONT] initializing core...
    [LCDFONT] adding font /share/fonts/12.pcf.gz...OK (Fix12/Regular)
    [LCDFONT] adding font /share/fonts/14B.pcf.gz...OK (Fix14/Bold)
    [LCDFONT] adding font /share/fonts/15B.pcf.gz...OK (Fix15/Bold)
    [LCDFONT] Intializing font cache...
    [LCDFONT] FTC_Face_Requester (Fix15/Bold)
    [LCDFONT] FTC_Face_Requester (Fix14/Bold)
    /dev/input/event1: No such file or directory
    [neutrino] menue setup
    [controld] setting VideoFormat to auto
    loading locales: scandir: No such file or directory
    [neutrino] registering as event client
    [controld] setting VideoFormat to auto
    [neutrino] initialized everything
    [camd] set emm caid 1722 capid 1500
    PES, queue 0 normal.
    [camd] starting onid 0001 sid 0008
    [camd] set emm caid 1722 capid 1500
    descramble onid: 0001 sid: 0008 status: 1d1d
    [controld] VIDEO_EVENT_SIZE_CHANGED 544x576 (4:3 -> 4:3)
    [timeThread] time(): 18.04.2006 20:06:01, tim: Tue Apr 18 20:06:01 2006
    [timeThread] time(): 18.04.2006 20:06:11, tim: Tue Apr 18 20:06:11 2006
     
  8. Grisu01

    Grisu01 Junior Member

    Registriert seit:
    5. November 2004
    Beiträge:
    56
    Zustimmungen:
    0
    Punkte für Erfolge:
    16
    AW: Sport Portal weg!

    Und jetzt der Log vom Umschalten auf Sport Portal:

    [LCDFONT] FTC_Face_Requester (Fix12/Regular)
    zap failed!
     
  9. Grisu01

    Grisu01 Junior Member

    Registriert seit:
    5. November 2004
    Beiträge:
    56
    Zustimmungen:
    0
    Punkte für Erfolge:
    16
    AW: Sport Portal weg!

    Wo sind die Gurus? Brauche dringend hilfe.:winken:
     
  10. hopper

    hopper Lexikon

    Registriert seit:
    3. April 2003
    Beiträge:
    20.842
    Zustimmungen:
    1
    Punkte für Erfolge:
    48
    AW: Sport Portal weg!

    Heftige Diskussion mit kleinen... über die Technik von IP, DSL, VSDL