PROBLEM - Nokia dbox2 startet nicht mehr

Anzeige

AW: PROBLEM - Nokia dbox2 startet nicht mehr

 

AW: PROBLEM - Nokia dbox2 startet nicht mehr

Hab jetzt mal mit JTG geflasht.

Bootlog 1.Teil:

Code:

ªdebug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: BMon V1.0  mID 01
debug: feID 7a    gtxID 0b
debug: fpID 5a     dsID 01-5d.f0.1d.07.00.00-20
debug: HWrev X5  SWrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug: 
BOOTP/TFTP bootstrap loader (v0.3)
debug: 
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed
Flash-FS bootstrap loader (v1.5)
Found Flash-FS superblock version 3.1
Found file /root/platform/nokia-dbox2/kernel/os in Flash-FS
debug: Got Block #0032debug: Got Block #0004debug: Got Block #0008debug: Got Block #0012debug: Got Block #0016debug: Got Block #0020debug: Got Block #0024debug: Got Block #0028debug: Got Block #0032debug: Got Block #0036
will verify ELF image, start= 0x800000, size= 172152
verify sig: 262
Branching to 0x40000
 
U-Boot 1.3.3 (Tuxbox) (Jun 11 2008 - 22:26:40)
CPU:   PPC823ZTnnA at 67.200 MHz: 2 kB I-Cache 1 kB D-Cache
         *** Warning: CPU Core has Silicon Bugs -- Check the Errata ***
Board: DBOX2, Nokia, BMon V1.0
       Watchdog enabled
I2C:   ready
DRAM:  32 MB
FLASH:  8 MB
Scanning JFFS2 FS:   .  | / - \ |  done.
env: found "console"
FB:    ready
LCD:   ready
In:    serial
Out:   serial
Err:   serial
Net:   SCC ETHERNET
Options:
  1: Console on null
  2: Console on ttyS0
  3: Console on framebuffer
Select option (1-3), other keys to stop autoboot:  1  0 
............................................................... done
Un-Protected 63 sectors
### FS (squashfs) loading 'vmlinuz' to 0x100000
### FS load complete: 689377 bytes loaded to 0x100000
## Booting kernel from Legacy Image at 00100000 ...
   Image Name:   dbox2
   Image Type:   PowerPC Linux Kernel Image (gzip compressed)
   Data Size:    689313 Bytes = 673.2 kB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... OK
   Uncompressing Kernel Image ... OK
Linux version 2.4.36.6-dbox2 (vom Jtg-Team)  (gcc version 3.4.6) #1 Mi 11. Jun 22:31:34 CEST 2008
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: root=/dev/mtdblock2 rootfstype=squashfs console=ttyS0,9600 dbox_duplex=
Decrementer Frequency = 252000000/60
m8xx_wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)
m8xx_wdt: keep-alive trigger installed (PITC: 0x12C0)
Console: colour dummy device 80x25
Calibrating delay loop... 66.96 BogoMIPS
Memory: 30788k available (1172k kernel code, 348k data, 60k init, 0k highmem)
Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
devfs: v1.12c (20020818) Richard Gooch ([EMAIL="rgooch@atnf.csiro.au"]rgooch@atnf.csiro.au[/EMAIL])
devfs: boot_options: 0x1
JFFS2 version 2.2. (NAND) (C) 2001-2003 Red Hat, Inc.
squashfs: version 3.0 (2006/03/15) Phillip Lougher
i2c-core.o: i2c core module version 2.6.1 (20010830)
i2c-dev.o: i2c /dev entries driver module version 2.6.1 (20010830)
CPM UART driver version 0.04
ttyS0 at 0x0280 is on SMC1 using BRGttyS1 at 0x0380 is on SMC2 using BRG2
pty: 256 Unix98 ptys configured
half-duplex mode enabled
eth0: CPM ENET Version 0.2.dbox2 on SCC2, 00:50:9c:1d:21:da
loop: loaded (max 8 devices)
D-Box 2 flash driver (size->0x800000 mem->0x10000000)
D-Box 2 flash memory: Found 2 x16 devices at 0x0 in 32-bit bank
 Intel/Sharp Extended Query Table at 0x0035
cfi_cmdset_0001: Erase suspend on write enabled
Creating 6 MTD partitions on "D-Box 2 flash memory":
0x00000000-0x00020000 : "BR bootloader"
0x00020000-0x00040000 : "FLFS (U-Boot)"
0x00040000-0x006a0000 : "root (SquashFS_LZMA)"
0x006a0000-0x00800000 : "var (JFFS2)"
0x00020000-0x00800000 : "Flash without bootloader"
0x00000000-0x00800000 : "Complete Flash"
Linux video capture interface: v1.00
mice: PS/2 mouse device common for all mice
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (squashfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 60k init
init started: BusyBox v1.10.3 (2008-06-11 22:27:58 CEST)
Starting the automounter
insmod: unresolved symbol sock_create
insmod: unresolved symbol rpciod_up
insmod: unresolved symbol rpc_wake_up_task
event: $Id: event.c,v 1.12 2003/09/30 05:45:38 obi Exp $
tuxbox: no ide if detected
insmod: unresolved symbol add_timer
[i2c-8xx]: mpc 8xx i2c init
[i2c-8xx]: adapter: 0
insmod: unresolved symbol add_timer
$Id: cam.c,v 1.30 2004/01/10 16:36:34 alexw Exp $
cam: no firmware file found
insmod: unresolved symbol dvb_register_i2c_bus
insmod: unresolved symbol dvb_register_adapter
insmod: unresolved symbol dvb_register_device
insmod: unresolved symbol dvb_add_frontend_ioctls
insmod: unresolved symbol dvb_kernel_thread_setup
insmod: unresolved symbol avia_av_set_stc
insmod: unresolved symbol avia_gt_gv_copyarea
lcd.o: init lcd driver module
lcd.o: found KS0713/SED153X lcd interface
jtginfo $Id: jtginfo.c,v 2.0 2008/04/16 22:16:44 jtgriker Exp $
insmod: unresolved symbol avia_gt_ir_exit
insmod: unresolved symbol avia_av_set_sample_rate
insmod: unresolved symbol avia_gt_pig_show
insmod: unresolved symbol dvb_unregister_i2c_device
insmod: unresolved symbol dvb_unregister_i2c_device
insmod: unresolved symbol avia_av_stream_type_set
insmod: unresolved symbol avia_gt_dmx_get_ucode_info
insmod: unresolved symbol avia_gt_napi_dvr_send
insmod: unresolved symbol avia_av_write
Thu Jan  1 12:00:00 CET 1970
$Id: sectionsd.cpp,v 1.262 2008/05/12 11:06:37 seife Exp $
[ConfigFile] Unable to open file /var/tuxbox/config/neutrino.conf for reading.
[sectionsd] /var/tuxbox/config/neutrino.conf not found
[sectionsd] Caching max 6000 events
[sectionsd] Caching 14 days
[sectionsd] Caching 6 hours Extended Text
[sectionsd] Events are old 60min after their end time
/var/tuxbox/config/zapit/epgfilter.xml: No such file or directory
/var/tuxbox/config/mybouquets.xml: No such file or directory
[sectionsd] getUTC: open: No such file or directory
[sectionsd] open dmx: No such file or directory
[sectionsd] open dmx: No such file or directory
[sectionsd] open dmx: No such file or directory
[sectionsd] open dmx: No such file or directory
[sectionsd] open dmx: No such file or directory
[ConfigFile] Unable to open file /var/tuxbox/config/timerd.conf for reading.
$Id: zapit.cpp,v 1.410 2008/04/25 21:23:23 houdini Exp $
[frontend] uncommitted_switch_mode 0
[sectionsd] getUTC: open: No such file or directory
[frontend.cpp:CFrontend:62] /dev/dvb/adapter0/frontend0: No such file or directory
/var/tuxbox/config/zapit/services.xml: No such file or directory
[audio.cpp:CAudio:37] /dev/dvb/adapter0/audio0: No such file or directory
[video.cpp:CVideo:33] /dev/dvb/adapter0/video0: No such file or directory
[aviaext.cpp:CAViAext:37] /dev/dbox/aviaEXT: No such file or directory
[camd] /dev/dvb/adapter0/ca0: No such file or directory
[sectionsd] getUTC: open: No such file or directory
$Id: controld.cpp,v 1.130 2008/01/03 11:09:27 seife Exp $
[ConfigFile] Unable to open file /var/tuxbox/config/controld.conf for reading.
[controld] /var/tuxbox/config/controld.conf not found
[controld] Boxtype detected: (1, Nokia D-BOX2)
[controld] /dev/dvb/adapter0/video0: No such file or directory
[controld] /dev/dvb/adapter0/video0: No such file or directory
[controld]: ROUTEVIDEO v1 = 5 a1 = 1 v2 = 1 a2 = 1 v3 = 0 a3 = 1 fblk=1
[sectionsd] getUTC: open: No such file or directory
[controld] format: 4:3(LB)
[sectionsd] getUTC: open: No such file or directory
[yhttpd] Webserver nhttpd/3.1.8 (yhttpd_core/1.2.0)
[LCDFONT] initializing core...
[LCDFONT] adding font /share/fonts/micron.ttf...OK (Micron/Regular)
[LCDFONT] adding font /share/fonts/micron_bold.ttf...OK (Micron/Bold)
[LCDFONT] adding font /share/fonts/pakenham.ttf...[sectionsd] getUTC: open: No such file or directory
OK (Pakenham/Regular)
[LCDFONT] Intializing font cache...
[yhttpd] Webserver starting...
[sectionsd] getUTC: open: No such file or directory
[sectionsd] getUTC: open: No such file or directory
/bin/neutrino: /lib/libpng12.so.0: no version information available (required by /bin/neutrino)
[sectionsd] getUTC: open: No such file or directory
[sectionsd] getUTC: open: No such file or directory
[sectionsd] getUTC: open: No such file or directory
starting /bin/neutrino
[neutrino] frameBuffer Instance created
/dev/fb/0: No such file or directory
framebuffer not available.
FBIOPUT_VSCREENINFO: Bad file descriptor
FBIOGET_FSCREENINFO: Bad file descriptor
[neutrino] Error while setting framebuffer mode
zapit shot down :)
Waiting for controld (max. 5 seconds)
[sectionsd] getUTC: open: No such file or directory
[sectionsd] getUTC: open: No such file or directory
Waiting for controld (max. 4 seconds)
[sectionsd] getUTC: open: No such file or directory
Waiting for controld (max. 3 seconds)
[sectionsd] getUTC: open: No such file or directory
Waiting for controld (max. 2 seconds)
[sectionsd] getUTC: open: No such file or directory
Waiting for controld (max. 1 seconds)
[sectionsd] getUTC: open: No such file or directory
[sectionsd] getUTC: open: No such file or directory

 

AW: PROBLEM - Nokia dbox2 startet nicht mehr

2.Teil:

Code:

Going to halt system now ...
CXA2092 found
CXA2092 found
Unmounting 'tmpfs' on '/tmp'
[sectionsd] getUTC: open: No such file or directory
mcho: applet not found
mcho: applet not found
umount: cannot umount /tmp: Device or resource busy
mcho: applet not found
mcho: applet not found
mcho: applet not found
Unmounting 'jffs2' on '/var'
mcho: applet not found
[sectionsd] getUTC: open: No such file or directory
Ready to shutdown system...
The system is going down NOW!
Sending SIGTERM to all processes
[ConfigFile] Unable to open file /var/tuxbox/config/controld.conf for writing.
[yhttpd] !!! SIGNAL !!! :15!
[yhttpd] No special SIGNAL-Handler:15!
[yhttpd] stop requested......
Sending SIGKILL to all processes
Requesting system halt

Vorschläge, Ideen ?????????

Grüße
Jens

 

AW: PROBLEM - Nokia dbox2 startet nicht mehr

Code:

[frontend.cpp:CFrontend:62] /dev/dvb/adapter0/frontend0: No such file or directory

Da wird der Tuner nicht erkannt (muss aber nicht am Tuner selbst liegen.)
Da scheint irgendein Hardwaredefekt vor zu liegen. (zB. defekt am Frontprozessor der den I²C Bus steuert)

Gruß Gorcon

 

AW: PROBLEM - Nokia dbox2 startet nicht mehr

Das der Tuner nicht erkannt wird liegt mit sicherheit an den nicht geladenen Treibern, das Logfile ist ja voll mit den "unresolved symbol" Fehlermeldung beim Laden der diversen Module.

Solche dbox2 Fehlermeldung findet man im Netz öfter wenn man mal nach googled. Fehlerursachen ist dann meist ein defektes Flashimage, das müsste sich dann aber heilen wenn man ein neues Image flasht, oder ein HW-Defekt wie z.B. ein defekter AVIA oder defektes RAM, was vermutlich hier der Fall sein dürfte.

 

AW: PROBLEM - Nokia dbox2 startet nicht mehr

Danke erstmal für die zahlreichen Hinweise. Wie kann ich denn rausfinden, falls dieser HW-Defekt vorliegen sollte, ob es denn der AVIA oder der RAM ist?

 

AW: PROBLEM - Nokia dbox2 startet nicht mehr

Nein, auch im oberen Log wird der Tuner nicht erkannt und dort werden die ucodes ja geladen.
Ein blockierter I²C Bus erzeugt exakt die gleichen Fehlermeldungen.

 

AW: PROBLEM - Nokia dbox2 startet nicht mehr

Ein I²C Bus sagt mir leider gar nichts. Wie behebe ich dann das Problem?

 

AW: PROBLEM - Nokia dbox2 startet nicht mehr

Da hilft nur eine Werkstatt.
Kannst ja mal bei www.hallenberg.com nachfragen.

Gruß Gorcon