1. Cookies optimieren die Bereitstellung unserer Dienste. Mit der Nutzung unserer Dienste erklärst Du dich damit einverstanden, dass wir Cookies verwenden. Weitere Informationen
    Information ausblenden
  2. Willkommen im Forum von DIGITAL FERNSEHEN - dem führenden Portal für digitales Fernsehen, Medien und Entertainment. Wenn du hier neu bist, schau dich ruhig etwas um und melde dich an, um am Forengeschehen teilnehmen zu können.
    Information ausblenden

Nokia Avia 500 2xAmd Zap Failed

Dieses Thema im Forum "d-box 1 und d-box 2" wurde erstellt von loooker, 5. Oktober 2003.

  1. loooker

    loooker Neuling

    Registriert seit:
    5. Oktober 2003
    Punkte für Erfolge:
    I`ve big problem, Nokia starts but doesn`t display Channels on tv, soft Neutrino one of newest. If anybody can halp please write some. It`s booting log:

    debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
    debug: BMon V1.0 mID 01
    debug: feID dd gtxID 0b
    debug: fpID 5a dsID 01-13.18.5a.05.00.00-8b
    debug: HWrev X5 SWrev 0.81
    debug: B/Ex/Fl(MB) 32/00/08
    WATCHDOG reset enabled
    dbox2:root> debug:
    BOOTP/TFTP bootstrap loader (v0.3)
    debug: Transmitting BOOTP request via broadcast
    debug: Given up BOOTP/TFTP boot
    boot net failed

    Flash-FS bootstrap loader (v1.5)

    Found Flash-FS superblock version 3.1
    Found file /root/platform/nokia-dbox2/kernel/os in Flash-FS
    debug: Got Block #0044

    will verify ELF image, start= 0x800000, size= 203252
    verify sig: 262
    Branching to 0x40000

    PPCBoot 1.1.6 (TuxBox) (Jul 12 2002 - 20:57:43)

    CPU: PPC823ZTnnA at 67.100 MHz: 2 kB I-Cache 1 kB D-Cache
    *** Warning: CPU Core has Silicon Bugs -- Check the Errata ***
    Watchdog enabled
    Board: DBOX2, Nokia
    I2C: ready
    DRAM: 32 MB
    FLASH: 8 MB
    Scanning JFFS2 FS: . done.
    LCD: ready
    FB: loading - ready
    In: serial
    Out: serial
    Err: serial

    1: Console on null
    2: Console on ttyS0
    3: Console on framebuffer
    Select (1-3), other keys to stop autoboot: 0
    Un-Protected 63 sectors
    ### FS (cramfs) loading 'vmlinuz' to 0x100000
    ### FS load compleate: 647337 bytes loaded to 0x100000
    ## Booting image at 00100000 ...
    Image Name: dbox2
    Image Type: PowerPC Linux Kernel Image (gzip compressed)
    Data Size: 647273 Bytes = 632 kB = 0 MB
    Load Address: 00000000
    Entry Point: 00000000
    Verifying Checksum ... OK
    Uncompressing Kernel Image ... OK
    Linux version 2.4.19 (RathMa@P41700) (gcc version 3.2) #2 Sun Oct 20 19:49:11 20
    On node 0 totalpages: 8192
    zone(0): 8192 pages.
    zone(1): 0 pages.
    zone(2): 0 pages.
    Kernel command line: root=/dev/mtdblock2 console=ttyS0
    Decrementer Frequency = 251625000/60
    mpc8xx-wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)
    mpc8xx-wdt: keep-alive trigger activated (PITC: 0x2000)
    Console: colour dummy device 80x25
    Calibrating delay loop... 66.76 BogoMIPS
    Memory: 30788k available (1136k kernel code, 376k data, 68k init, 0k highmem)
    Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
    Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
    Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
    Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes)
    Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
    POSIX conformance testing by UNIFIX
    Linux NET4.0 for Linux 2.4
    Based upon Swansea University Computer Society NET3.039
    Initializing RT netlink socket
    Starting kswapd
    devfs: v1.12a (20020514) Richard Gooch (rgooch@atnf.csiro.au)
    devfs: boot_options: 0x1
    JFFS2 version 2.1. (C) 2001, 2002 Red Hat, Inc., designed by Axis Communications
    i2c-core.o: i2c core module
    CPM UART driver version 0.03
    ttyS00 at 0x0280 is a SMC
    ttyS01 at 0x0380 is a SMC
    pty: 256 Unix98 ptys configured
    eth0: CPM ENET Version 0.2 on SCC2, 00:50:9c:10:89:50
    D-Box 2 flash driver (size->0x800000 mem->0x10000000)
    Amd/Fujitsu Extended Query Table v1.1 at 0x0040
    number of CFI chips: 1
    cfi_cmdset_0002: Disabling fast programming due to code brokenness.
    Creating 6 MTD partitions on "D-Box 2 flash memory":
    0x00000000-0x00020000 : "BR bootloader"
    0x00020000-0x00040000 : "flfs (ppcboot)"
    0x00040000-0x00700000 : "root (cramfs)"
    0x00700000-0x00800000 : "var (jffs2)"
    0x00020000-0x00800000 : "flash without bootloader"
    0x00000000-0x00800000 : "complete flash"
    NET4: Linux TCP/IP 1.0 for NET4.0
    IP Protocols: ICMP, UDP, TCP, IGMP
    IP: routing cache hash table of 512 buckets, 4Kbytes
    TCP: Hash tables configured (established 2048 bind 4096)
    NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
    VFS: Mounted root (cramfs filesystem) readonly.
    Mounted devfs on /dev
    Freeing unused kernel memory: 68k init
    init started: BusyBox v0.61.pre (2002.09.22-12:09+0000) multi-ca[i2c-8xx]: mpc
    8xx i2c init
    i2c-core.o: adapter registered as adapter 0.
    [i2c-8xx]: adapter: 0
    i2c-core.o: driver FOR_PROBE_ONLY registered.
    i2c-core.o: driver unregistered: FOR_PROBE_ONLY
    i2c-core.o: driver FOR_PROBE_ONLY registered.
    i2c-core.o: driver unregistered: FOR_PROBE_ONLY
    lcd.o: init lcd driver module
    lcd.o: found KS0713/SED153X lcd interface on 1
    event: init ...
    i2c-core.o: driver i2c audio/video switch driver registered.
    i2c-core.o: client [CXA2092] registered to adapter [](pos. 0).
    i2c-core.o: driver i2c saa7126 driver registered.
    i2c-core.o: client [i2c saa7126 chip] registered to adapter [](pos. 1).
    i2c-core.o: driver DBox2 Frontprocessor driver registered.
    i2c-core.o: client [DBox2 Frontprocessor client] registered to adapter [](pos. 2
    AVIA: $Id: avia_core.c,v 1.31 2002/08/22 13:39:33 Jolt Exp $
    der moment ist gekommen...
    i2c-core.o: driver DBox2-CAM registered.
    CAM: attaching CAM at 0x6e
    i2c-core.o: client [DBOX2-CAM] registered to adapter [](pos. 3).
    CAM: attached to adapter
    write 1 event's ...
    write 1 event's ...
    avia_gt_core: $Id: avia_gt_core.c,v 1.21 2002/08/22 13:39:33 Jolt Exp $
    avia_gt_core: autodetecting chip type... AViA GTX found
    avia_gt_gtx: $Id: avia_gt_gtx.c,v 1.16 2002/09/02 13:39:33 neBox Exp $
    avia_gt_dmx: $Id: avia_gt_dmx.c,v 1.122 2002/09/10 17:18:31 Jolt Exp $
    avia_gt_core: masking unhandled irq reg 1 bit 11
    avia_gt_core: masking unhandled irq reg 1 bit 13
    avia_gt_dmx: Successfully loaded ucode V0.14
    avia_gt_dmx: RISC mem map size: 2048
    avia_gt_dmx: warning, misaligned queue 0 (is 0x32A00, size 65536), aligning...
    avia_gt_gv: $Id: avia_gt_gv.c,v 1.22 2002/08/22 13:39:33 Jolt Exp $
    avia_gt_gv: set_input_size (width=720, height=576)
    avia_gt_pcm: $Id: avia_gt_pcm.c,v 1.17 2002/08/22 13:39:33 Jolt Exp $
    avia_gt_capture: $Id: avia_gt_capture.c,v 1.22 2002/08/22 13:39:33 Jolt Exp $
    avia_gt_pig: $Id: avia_gt_pig.c,v 1.28 2002/08/22 13:39:33 Jolt Exp $
    avia_gt_ir: $Id: avia_gt_ir.c,v 1.19 2002/08/22 13:39:33 Jolt Exp $
    avia_gt_core: Loaded AViA eNX/GTX driver
    Init VES1893
    i2c-core.o: driver VES1893 DVB demodulator registered.
    i2c-core.o: client [VES1893] registered to adapter [](pos. 4).
    avia_gt_core: masking unhandled irq reg 0 bit 6
    VES1893: attaching VES1893 at 0x10 to adapter
    avia_gt_napi: $Id: avia_gt_napi.c,v 1.116 2002/09/10 21:15:34 Jolt Exp $
    avia_gt_napi: hardware section filtering disabled.
    avia_gt_vbi: $Id: avia_gt_vbi.c,v 1.16 2002/08/22 13:39:33 Jolt Exp $
    avia_gt_vbi: got demux C-Cube - AViA eNX/GTX
    avia_gt_fb: $Id: avia_gt_fb_core.c,v 1.36 2002/08/22 13:39:33 Jolt Exp $
    avia_gt_gv: set_input_mode (mode=2)
    avia_gt_gv: set_input_size (width=720, height=576)
    avia_gt_gv: set_input_mode (mode=2)
    avia_gt_gv: set_input_size (width=720, height=576)
    avia_gt_gv: set_input_mode (mode=2)
    avia_gt_gv: set_input_size (width=720, height=576)
    Console: switching to colour frame buffer device 82x32
    avia_gt_fb: fb0: AViA eNX/GTX Framebuffer frame buffer device
    avia_oss: $Id: avia_gt_oss.c,v 1.8 2002/08/22 13:39:33 Jolt Exp $
    avia_gt_proc: $Id: avia_gt_proc.c,v by neBox 2002/09/28 23:08:00
    CXA2092 found
    CXA2092 found
    [TIMERD]IDS: 0
    $Id: sectionsd.cpp,v 1.128 2002/08/27 19:00:45 obi Exp $
    caching 504 hours
    events are old 60min after their end time
    Connection to failed.

    camd: Preferred caid for Betacrypt/Irdeto smartcard will be 1702
    $Id: zapit.cpp,v 1.221 2002/09/11 14:41:20 neBox Exp $

    [getservices.cpp] going to parse satellite Astra 19.2E
    [getservices.cpp] going to parse satellite HotBird 13.0E
    [getservices.cpp] going to parse satellite Sirius 5.0E
    [zapit] LoadServices: success
    [zapit] reading Bouquets ........................................
    [zapit] Found 40 bouquets.
    [zapit] channels have been loaded succesfully
    Network LCD-Driver $Id: lcdd.cpp,v 1.54 2002/08/31 22:30:27 obi Exp $

    [lcdd] time-skin not found -> using default...
    [lcdd] weekday-skin not found -> using default...
    [lcdd] date-skin not found -> using default...
    [lcdd] month-skin not found -> using default...
    [lcdd] load config
    [FONT] initializing core...
    [FONT] adding font /share/fonts/micron.ttf...OK (Micron/Regular)
    [FONT] Intializing font cache...
    [FONT] FTC_Face_Requester (Micron/Regular)
    Controld $Id: controld.cpp,v 1.61 2002/08/27 19:00:45 obi Exp $

    [controld] Boxtype detected: (01, 1, 1, Nokia)
    set event: 00000009
    [controld] Unknown aspectRatio: 0[controld] setting VideoFormat to auto
    [neutrino] NeutrinoNG $Id: neutrino.cpp,v 1.318 2002/09/07 16:33:46 dirch Exp $

    [neutrino] frameBuffer Instance created
    [neutrino] vcrControl Instance created
    1024k video mem
    avia_gt_gv: set_input_mode (mode=2)
    avia_gt_gv: set_input_size (width=720, height=576)
    [neutrino] enable flash
    IP :
    Netmask :
    Gateway :
    CVCRControl registered new serverdevice: 0 ngrab
    [neutrino] menue setup
    scandir: No such file or directory
    [controld] setting VideoFormat to auto
    video notify: videomenu.videoformat
    [neutrino] control event register
    [neutrino] sectionsd event register
    [neutrino] zapit event register
    [neutrino] timerd event register
    [CPlugins] Dir: /lib/tuxbox/plugins/
    [CPlugins] 10 plugins found...
    [CFrontend::setFrontend] freq 2092000
    [CFrontend::getEvent] FE_FAILURE_EV
    zap failed!
    initial zap failed - rezap
    [CFrontend::setFrontend] freq 2092000
    [CFrontend::getEvent] FE_FAILURE_EV
    zap failed!

  2. Space_2063

    Space_2063 Senior Member

    Registriert seit:
    22. August 2003
    Punkte für Erfolge:
    Sorry to say, but you are running a software patch that was not distributed by a member of the tuxbox forum. Therefore I'm afraid that nobody than the author is able to support his tweaks.

    Btw: neutrino.cpp,v 1.318 2002/09/07 is not really "one of the newest" winken

Diese Seite empfehlen