Nach einstecken von Stromkabel stundelang "Lade..."

Anzeige

AW: Nach einstecken von Stromkabel stundelang "Lade..."

Genau das gleiche Symptom, sie startet neu, sobald das Kernel geladen wird. :wüt:


debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: BMon V1.2 mID 01
debug: feID 7a gtxID 0b
debug: fpID 5a dsID 01-65.37.81.07.00.00-ec
debug: HWrev 09 FPrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed

Flash-FS bootstrap loader (v1.5)

Found Flash-FS superblock version 3.1
Found file /root/platform/nokia-dbox2/kernel/os in Flash-FS
boot flash /root/platform/nokia-dbox2/kernel/os failed

Flash-FS bootstrap loader (v1.5)

Found Flash-FS superblock version 3.1
Found file /root/platform/mpc8xx-dbox2/kernel/os in Flash-FS
boot flash /root/platform/mpc8xx-dbox2/kernel/os failed

Flash-FS bootstrap loader (v1.5)

Found Flash-FS superblock version 3.1
Found file /root/platform/kernel/os in Flash-FS
boot flash /root/platform/kernel/os failed

Flash-FS bootstrap loader (v1.5)

Found Flash-FS superblock version 3.1
File /root.new/platform/nokia-dbox2/kernel/os not found: No such file or directo
ry
boot flash /root.new/platform/nokia-dbox2/kernel/os failed

Flash-FS bootstrap loader (v1.5)

Found Flash-FS superblock version 3.1
File /root.new/platform/mpc8xx-dbox2/kernel/os not found: No such file or direct
ory
boot flash /root.new/platform/mpc8xx-dbox2/kernel/os failed

Flash-FS bootstrap loader (v1.5)

Found Flash-FS superblock version 3.1
File /root.new/platform/kernel/os not found: No such file or directory
boot flash /root.new/platform/kernel/os failed

Flash-FS bootstrap loader (v1.5)

Found Flash-FS superblock version 3.1
File /lost+found/root/platform/nokia-dbox2/kernel/os not found: No such file or
directory
boot flash /lost+found/root/platform/nokia-dbox2/kernel/os failed

Flash-FS bootstrap loader (v1.5)

Found Flash-FS superblock version 3.1
File /lost+found/root/platform/mpc8xx-dbox2/kernel/os not found: No such file or
directory
boot flash /lost+found/root/platform/mpc8xx-dbox2/kernel/os failed

Flash-FS bootstrap loader (v1.5)

Found Flash-FS superblock version 3.1
File /lost+found/root/platform/kernel/os not found: No such file or directory
boot flash /lost+found/root/platform/kernel/os failed
dbox2:root> boot net
debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Got BOOTP reply from Server IP 192.168.1.2, My IP 192.168.1.201
debug: Sending TFTP-request for file C/tftpboot/u-boot-yadd
will verify ELF image, start= 0x800000, size= 135620
verify sig: 262
boot net: boot file has no valid signature
Branching to 0x40000


U-Boot 1.1.4 (Tuxbox) (Apr 9 2006 - 04:49:03)

CPU: PPC823ZTnnB2 at 67.100 MHz: 2 kB I-Cache 1 kB D-Cache
Board: DBOX2, Nokia, BMon V1.2
Watchdog enabled
I2C: ready
DRAM: 32 MB
FLASH: 8 MB
FB: ready
LCD: ready
In: serial
Out: serial
Err: serial
Net: SCC ETHERNET
BOOTP broadcast 1
Using SCC ETHERNET device
TFTP from server 192.168.1.2; our IP address is 192.168.1.201
Filename 'C/tftpboot/u-boot-yadd'.
Load address: 0x100000
Loading: Using SCC ETHERNET device
TFTP from server 192.168.1.2; our IP address is 192.168.1.201
Filename 'logo-lcd'.
Load address: 0x100000
Loading: ##
done
Bytes transferred = 7680 (1e00 hex)
BOOTP broadcast 1
Using SCC ETHERNET device
TFTP from server 192.168.1.2; our IP address is 192.168.1.201
Filename 'C/tftpboot/u-boot-yadd'.
Load address: 0x100000
Loading: Using SCC ETHERNET device
TFTP from server 192.168.1.2; our IP address is 192.168.1.201
Filename 'logo-fb'.
Load address: 0x100000
Loading: #########
done
Bytes transferred = 43045 (a825 hex)

Options:
1: Console on null
2: Console on ttyS0
3: Console on framebuffer
Select option (1-3), other keys to stop autoboot: 0
Using SCC ETHERNET device
TFTP from server 192.168.1.2; our IP address is 192.168.1.201
Filename 'kernel-yadd'.
Load address: 0x100000
Loading: #################################################################
#################################################################
##########################
done
Bytes transferred = 798115 (c2da3 hex)
...............................................................
Un-Protected 63 sectors
## Booting image at 00100000 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 798051 Bytes = 779.3 kB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Linux version 2.4.32-dbox2 (dietmarw@linux) (gcc version 3.4.4) #1 So Apr 9 04:5
0:38 CEST 2006
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: console=ttyS0 root=/dev/nfs rw nfsroot=192.168.1.2:C/yaddro
ot/ ip=192.168.1.201:192.168.1.2::::ff
Decrementer Frequency = 251625000/60
m8xx_wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)
m8xx_wdt: keep-alive trigger installed (PITC: 0x2580)
Console: colour dummy device 80x25

debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: WATCHDOG RESET
debug: BMon V1.2 mID 01
debug: feID 7a gtxID 0b
debug: fpID 5a dsID 01-65.37.81.07.00.00-ec
debug: HWrev 09 FPrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Got BOOTP reply from Server IP 192.168.1.2, My IP 192.168.1.201
debug: Sending TFTP-request for file C/tftpboot/u-boot-yadd
will verify ELF image, start= 0x800000, size= 135620
verify sig: 262
boot net: boot file has no valid signature
Branching to 0x40000


U-Boot 1.1.4 (Tuxbox) (Apr 9 2006 - 04:49:03)

CPU: PPC823ZTnnB2 at 67.100 MHz: 2 kB I-Cache 1 kB D-Cache
Board: DBOX2, Nokia, BMon V1.2
Watchdog enabled
I2C: ready
DRAM: 32 MB
FLASH: 8 MB
FB: ready
LCD: ready
In: serial
Out: serial
Err: serial
Net: SCC ETHERNET
BOOTP broadcast 1
Using SCC ETHERNET device
TFTP from server 192.168.1.2; our IP address is 192.168.1.201
Filename 'C/tftpboot/u-boot-yadd'.
Load address: 0x100000
Loading: Using SCC ETHERNET device
TFTP from server 192.168.1.2; our IP address is 192.168.1.201
Filename 'logo-lcd'.
Load address: 0x100000
Loading: ##
done
Bytes transferred = 7680 (1e00 hex)
BOOTP broadcast 1
Using SCC ETHERNET device
TFTP from server 192.168.1.2; our IP address is 192.168.1.201
Filename 'C/tftpboot/u-boot-yadd'.
Load address: 0x100000
Loading: Using SCC ETHERNET device
TFTP from server 192.168.1.2; our IP address is 192.168.1.201
Filename 'logo-fb'.
Load address: 0x100000
Loading: #########
done
Bytes transferred = 43045 (a825 hex)

Options:
1: Console on null
2: Console on ttyS0
3: Console on framebuffer
Select option (1-3), other keys to stop autoboot: 0

 

AW: Nach einstecken von Stromkabel stundelang "Lade..."

 

AW: Nach einstecken von Stromkabel stundelang "Lade..."

Sorry - bin nicht so der Hardware Spezi.
Mein Wissen reicht halt in der Hinsicht nur soweit, dass man dank Debug und dem dann möglichen Log auf Harwareprobleme besser schließen kann. Und danach sieht's ja leider aus. Ärgerlich der ganze Aufwand. Aber das Ausgangsproblem hätte auch andere Ursachen haben können...

 

AW: Nach einstecken von Stromkabel stundelang "Lade..."

Die Box soll vom PC aus das yadd booten, dann darf da nicht Boot net failed erscheinen.

Gruß Gorcon

 

AW: Nach einstecken von Stromkabel stundelang "Lade..."

Aber wenn ich es mit dem Bootloader mache, dann bringt er zuerst "boot net failed" und ladet aus dem flash. Danach habe ich dann manuell boot net eingegeben und dann hat er problemlos vom PC geladen (bis zu dem gewissen Punkt). Oder verstehe ich etwas falsch? So stand es zumindest auf einer Seite von dietmar-h.