loading kernel...

Anzeige

AW: loading kernel...

*LOL*

Nachdem ich erfolgreich einen Senderdurchlauf durchgeführt habe, und auch schon gezappt bin. Natürlich nur Premiere Sender, wo kein Bild rein kommt...hat sich die Box beim Zappen aufgehängt...also ich stecker raus und wieder rein...die Folge: es geht wieder nix...Box startet, loading kernel...dann ist das Display schwarz und nach einer Zeit schaltet sie sich aus...

*GRRRRRRRRRRRR*

 

AW: loading kernel...

so sieht das COM LOGfile derzeit aus:


/debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: BMon V1.0 mID 01
debug: feID dd gtxID 0b
debug: fpID 5a dsID 01-f8.bf.dc.06.00.00-0c
debug: HWrev X5 SWrev 0.81
debug: B/Ex/Fl(MB) 16/16/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed
Flash-FS bootstrap loader (v1.5)
Found Flash-FS superblock version 3.1
Found file /root/platform/nokia-dbox2/kernel/os in Flash-FS
debug: Got Block #0036
will verify ELF image, start= 0x800000, size= 160684
verify sig: 263
Branching to 0x40000

U-Boot 1.1.2 (Tuxbox) (Mar 16 2005 - 20:36:54)
CPU: PPC823ZTnnA at 67.200 MHz: 2 kB I-Cache 1 kB D-Cache
*** Warning: CPU Core has Silicon Bugs -- Check the Errata ***
Board: DBOX2, Nokia, BMon V1.0
Watchdog enabled
I2C: ready
DRAM: 32 MB
FLASH: 8 MB
Scanning JFFS2 FS: . done.
FB: ready
LCD: ready
In: serial
Out: serial
Err: serial
Net: SCC ETHERNET
Options:
1: Console on null
2: Console on ttyS0
3: Console on framebuffer
Select option (1-3), other keys to stop autoboot: 0
### FS (squashfs) loading 'vmlinuz' to 0x100000
### FS load complete: 627248 bytes loaded to 0x100000
...............................................................
Un-Protected 63 sectors
## Booting image at 00100000 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 627184 Bytes = 612.5 kB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Linux version 2.4.27-dbox2 (ImageTeam@yadi.org) (gcc version 3.3.5) #2 Mi Mr 16
21:18:16 CET 2005
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: console=ttyS0 root=/dev/mtdblock1 rootfstype=squashfs
Decrementer Frequency = 252000000/60
m8xx_wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)
m8xx_wdt: keep-alive trigger installed (PITC: 0x12C0)
Console: colour dummy device 80x25
Calibrating delay loop... 66.96 BogoMIPS
Memory: 30904k available (1068k kernel code, 336k data, 60k init, 0k highmem)
Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
JFFS2 version 2.2. (C) 2001-2003 Red Hat, Inc.
Squashfs 2.1-r2 (released 2004/12/15) (C) 2002-2004 Phillip Lougher
i2c-core.o: i2c core module version 2.6.1 (20010830)
i2c-dev.o: i2c /dev entries driver module version 2.6.1 (20010830)
CPM UART driver version 0.04
ttyS0 at 0x0280 is on SMC1 using BRGttyS1 at 0x0380 is on SMC2 using BRG2
pty: 256 Unix98 ptys configured
eth0: CPM ENET Version 0.2.dbox2 on SCC2, 00:50:9c:11:a0:49
loop: loaded (max 8 devices)
D-Box 2 flash driver (size->0x800000 mem->0x10000000)
D-Box 2 flash memory: Found 2 x16 devices at 0x0 in 32-bit mode
Amd/Fujitsu Extended Query Table at 0x0040
number of CFI chips: 1
cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness.
Creating 6 MTD partitions on "D-Box 2 flash memory":
0x00000000-0x00020000 : "BR bootloader"
0x00020000-0x00680000 : "root (squashfs)"
0x00680000-0x007e0000 : "var (jffs2)"
0x007e0000-0x00800000 : "flfs (u-boot)"
0x00020000-0x00800000 : "flash without bootloader"
0x00000000-0x00800000 : "complete flash"
Linux video capture interface: v1.00
mice: PS/2 mouse device common for all mice
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (squashfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 60k init
Starting pid 10, console /dev/console: '/etc/init.d/rcS'ti-call b
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00000a20: 0x0085 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00000a28: 0xc320 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00000a38: 0x4238 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00000a3c: 0x090a in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00000a40: 0x0a47 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00000a44: 0xe25e in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00000a48: 0x7263 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00000a4c: 0x6c6f in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00000a50: 0x6cff in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00000ab0: 0x0085 in
stead
Further such events for this erase block will not be printed
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00119ccc: 0x0085 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00119cd4: 0x2d2e in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00119ce4: 0x430c in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00119ce8: 0x0b08 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00119cec: 0x3a22 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00119cf0: 0xf5fa in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00119cf4: 0x7469 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00119cf8: 0x7264 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0

 

AW: loading kernel...

so sieht ein kompletter Boot Vorgang aus:

TEIL1:
debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: BMon V1.0 mID 01
debug: feID dd gtxID 0b
debug: fpID 5a dsID 01-f8.bf.dc.06.00.00-0c
debug: HWrev X5 SWrev 0.81
debug: B/Ex/Fl(MB) 16/16/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed
Flash-FS bootstrap loader (v1.5)
Found Flash-FS superblock version 3.1
Found file /root/platform/nokia-dbox2/kernel/os in Flash-FS
debug: Got Block #0036
will verify ELF image, start= 0x800000, size= 160684
verify sig: 263
Branching to 0x40000

U-Boot 1.1.2 (Tuxbox) (Mar 16 2005 - 20:36:54)
CPU: PPC823ZTnnA at 67.200 MHz: 2 kB I-Cache 1 kB D-Cache
*** Warning: CPU Core has Silicon Bugs -- Check the Errata ***
Board: DBOX2, Nokia, BMon V1.0
Watchdog enabled
I2C: ready
DRAM: 32 MB
FLASH: 8 MB
Scanning JFFS2 FS: . done.
FB: ready
LCD: ready
In: serial
Out: serial
Err: serial
Net: SCC ETHERNET
Options:
1: Console on null
2: Console on ttyS0
3: Console on framebuffer
Select option (1-3), other keys to stop autoboot: 0
### FS (squashfs) loading 'vmlinuz' to 0x100000
### FS load complete: 627248 bytes loaded to 0x100000
...............................................................
Un-Protected 63 sectors
## Booting image at 00100000 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 627184 Bytes = 612.5 kB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Linux version 2.4.27-dbox2 (ImageTeam@yadi.org) (gcc version 3.3.5) #2 Mi Mr 16
21:18:16 CET 2005
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: console=ttyS0 root=/dev/mtdblock1 rootfstype=squashfs
Decrementer Frequency = 252000000/60
m8xx_wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)
m8xx_wdt: keep-alive trigger installed (PITC: 0x12C0)
Console: colour dummy device 80x25
Calibrating delay loop... 66.96 BogoMIPS
Memory: 30904k available (1068k kernel code, 336k data, 60k init, 0k highmem)
Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
JFFS2 version 2.2. (C) 2001-2003 Red Hat, Inc.
Squashfs 2.1-r2 (released 2004/12/15) (C) 2002-2004 Phillip Lougher
i2c-core.o: i2c core module version 2.6.1 (20010830)
i2c-dev.o: i2c /dev entries driver module version 2.6.1 (20010830)
CPM UART driver version 0.04
ttyS0 at 0x0280 is on SMC1 using BRGttyS1 at 0x0380 is on SMC2 using BRG2
pty: 256 Unix98 ptys configured
eth0: CPM ENET Version 0.2.dbox2 on SCC2, 00:50:9c:11:a0:49
loop: loaded (max 8 devices)
D-Box 2 flash driver (size->0x800000 mem->0x10000000)
D-Box 2 flash memory: Found 2 x16 devices at 0x0 in 32-bit mode
Amd/Fujitsu Extended Query Table at 0x0040
number of CFI chips: 1
cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness.
Creating 6 MTD partitions on "D-Box 2 flash memory":
0x00000000-0x00020000 : "BR bootloader"
0x00020000-0x00680000 : "root (squashfs)"
0x00680000-0x007e0000 : "var (jffs2)"
0x007e0000-0x00800000 : "flfs (u-boot)"
0x00020000-0x00800000 : "flash without bootloader"
0x00000000-0x00800000 : "complete flash"
Linux video capture interface: v1.00
mice: PS/2 mouse device common for all mice
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (squashfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 60k init
Starting pid 10, console /dev/console: '/etc/init.d/rcS'ti-call b
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00000a20: 0x0085 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00000a28: 0xc320 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00000a38: 0x4238 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00000a3c: 0x090a in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00000a40: 0x0a47 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00000a44: 0xe25e in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00000a48: 0x7263 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00000a4c: 0x6c6f in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00000a50: 0x6cff in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00000ab0: 0x0085 in
stead
Further such events for this erase block will not be printed
jffs2_scan_erasebloc

 

AW: loading kernel...

2TEIL


jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00000a48: 0x7263 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00000a4c: 0x6c6f in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00000a50: 0x6cff in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00000ab0: 0x0085 in
stead
Further such events for this erase block will not be printed
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x001125fc: 0x0085 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00112604: 0xb427 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00112614: 0xffef in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00112618: 0x0804 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0011261c: 0x0e0a in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00112620: 0xeb11 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00112624: 0x6e65 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00112628: 0x7269 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00112880: 0x0085 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00112888: 0x2d2e in
stead
Further such events for this erase block will not be printed
Using /lib/modules/2.4.27-dbox2/misc/event.o
event: $Id: event.c,v 1.12 2003/09/30 05:45:38 obi Exp $
Using /lib/modules/2.4.27-dbox2/misc/tuxbox.o
Using /lib/modules/2.4.27-dbox2/misc/dvb-core.o
Using /lib/modules/2.4.27-dbox2/misc/dbox2_i2c.o
[i2c-8xx]: mpc 8xx i2c init
[i2c-8xx]: adapter: 0
Using /lib/modules/2.4.27-dbox2/misc/dbox2_fp.o
Using /lib/modules/2.4.27-dbox2/misc/dbox2_fp_input.o
Using /lib/modules/2.4.27-dbox2/misc/avs.o
Using /lib/modules/2.4.27-dbox2/misc/saa7126.o
Detected STB:
Vendor: Nokia
Model: D-BOX2
Using /lib/modules/2.4.27-dbox2/misc/cam.o
$Id: cam.c,v 1.30 2004/01/10 16:36:34 alexw Exp $
Using /lib/modules/2.4.27-dbox2/misc/dvb_i2c_bridge.o
Using /lib/modules/2.4.27-dbox2/misc/avia_napi.o
$Id: avia_napi.c,v 1.18 2003/11/24 09:53:01 obi Exp $
DVB: registering new adapter (C-Cube AViA GTX/eNX with AViA 500/600).
dvb_i2c_bridge: enabled DVB i2c bridge to PowerPC 8xx I2C adapter
Using /lib/modules/2.4.27-dbox2/misc/cam_napi.o
$Id: cam_napi.c,v 1.8 2003/09/30 05:45:34 obi Exp $
Using /lib/modules/2.4.27-dbox2/misc/dbox2_fp_napi.o
Using /lib/modules/2.4.27-dbox2/misc/avia_av.o
avia_av: $Id: avia_av_core.c,v 1.98 2004/11/21 20:33:38 carjay Exp $
avia_av_core: Starting avia_av_wdt thread.
avia_av: microcode verify: 24272 errors.
avia_av: imem verify: 98 errors
avia_av: timeout waiting for decoder init to complete. (00000000)
insmod: init_module: avia_av: Input/output error
Using /lib/modules/2.4.27-dbox2/misc/avia_gt.o
insmod: unresolved symbol avia_av_set_stc
Using /lib/modules/2.4.27-dbox2/misc/avia_gt_fb.o
insmod: unresolved symbol avia_gt_gv_copyarea
insmod: unresolved symbol avia_gt_gv_show
insmod: unresolved symbol avia_gt_gv_get_clut
insmod: unresolved symbol avia_gt_gv_get_blevel
insmod: unresolved symbol avia_gt_gv_set_input_size
insmod: unresolved symbol avia_gt_gv_set_pos
insmod: unresolved symbol avia_gt_gv_hide
insmod: unresolved symbol avia_gt_get_info
insmod: unresolved symbol avia_gt_gv_set_size
insmod: unresolved symbol avia_gt_gv_set_input_mode
insmod: unresolved symbol avia_gt_gv_set_clut
insmod: unresolved symbol avia_gt_gv_set_blevel
insmod: unresolved symbol avia_gt_gv_get_info
Using /lib/modules/2.4.27-dbox2/misc/lcd.o
lcd.o: init lcd driver module
lcd.o: found KS0713/SED153X lcd interface
Using /lib/modules/2.4.27-dbox2/misc/avia_gt_lirc.o
insmod: unresolved symbol avia_gt_ir_exit
insmod: unresolved symbol avia_gt_ir_receive_pulse
insmod: unresolved symbol avia_gt_ir_receive_data
insmod: unresolved symbol avia_gt_ir_get_rx_buffer_write_position
insmod: unresolved symbol avia_gt_ir_send_buffer
insmod: unresolved symbol avia_gt_ir_queue_pulse
insmod: unresolved symbol avia_gt_ir_init
insmod: unresolved symbol avia_gt_ir_set_duty_cycle
insmod: unresolved symbol avia_gt_ir_set_frequency
insmod: unresolved symbol avia_gt_ir_get_rx_buffer_read_position
Using /lib/modules/2.4.27-dbox2/misc/avia_gt_oss.o
insmod: unresolved symbol avia_av_set_sample_rate
insmod: unresolved symbol avia_gt_pcm_play_buffer
insmod: unresolved symbol avia_gt_pcm_stop
insmod: unresolved symbol avia_gt_pcm_set_signed
insmod: unresolved symbol avia_gt_pcm_set_endian
insmod: unresolved symbol avia_gt_pcm_set_rate
insmod: unresolved symbol avia_gt_pcm_set_width
insmod: unresolved symbol avia_gt_pcm_poll
insmod: unresolved symbol avia_gt_pcm_set_channels
insmod: unresolved symbol avia_av_get_sample_rate
insmod: unresolved symbol avia_gt_pcm_set_pcm_attenuation
insmod: unresolved symbol avia_gt_pcm_get_block_size
Using /lib/modules/2.4.27-dbox2/misc/avia_gt_v4l2.o
insmod: unresolved symbol avia_gt_pig_show
insmod: unresolved symbol avia_gt_pig_set_stack
insmod: unresolved symbol avia_gt_pig_set_size
insmod: unresolved symbol avia_gt_pig_set_pos
insmod: unresolved symbol avia_gt_pig_hide
Using /lib/modules/2.4.27-dbox2/misc/ves1820.o
Using /lib/modules/2.4.27-dbox2/misc/ves1x93.o
DVB: registering frontend 0:0 (VES1893)...
Using /lib/modules/2.4.27-dbox2/misc/avia_av_napi.o
insmod: unresolved symbol avia_av_stream_type_set
insmod: unresolved symbol avia_av_register_video_event_handler
insmod: unresolved symbol avia_av_set_audio_attenuation
insmod: unresolved symbol avia_av_write
insmod: unresolved symbol avia_av_pid_set
insmod: unresolved symbol avia_av_audio_pts_to_stc
insmod: unresolved symbol avia_gt_dmx_queue_write
insmod: unresolved symbol avia_gt_dmx_enable_clip_mode
insmod: unresolved symbol avia_gt_dmx_disable_clip_mode
insmod: unresolved symbol avia_av_play_state_set_video
insmod: unresolved symbol avia_av_unregister_video_event_handler
insmod: unresolved symbol avia_av_get_video_size
insmod: unresolved symbol avia_av_play_state_set_audio
insmod: unresolved symbol avia_av_read
insmod: unresolved symbol avia_gt_pcm_set_mpeg_attenuation
insmod: unresolved symbol avia_av_new_audio_config
insmod: unresolved symbol avia_av_set_video_system
insmod: unresolved symbol avia_av_bypass_mode_set
insmod: unresolved symbol avia_av_sync_mode_set
insmod: unresolved symbol avia_gt_dmx_queue_nr_get_bytes_free
Using /lib/modules/2.4.27-dbox2/misc/avia_gt_napi.o
insmod: unresolved symbol avia_gt_dmx_get_ucode_info
insmod: unresolved symbol avia_gt_vbi_start
insmod: unresolved symbol avia_gt_dmx_queue_reset
insmod: unresolved symbol avia_av_napi_decoder_stop
insmod: unresolved symbol avia_gt_dmx_queue_stop
insmod: unresolved symbol avia_gt_dmx_queue_irq_enable
insmod: unresolved symbol avia_gt_dmx_set_pcr_pid
insmod: unresolved symbol avia_gt_vbi_stop
insmod: unresolved symbol avia_av_audio_pts_to_stc
insmod: unresolved symbol avia_gt_dmx_queue_write
insmod: unresolved symbol avia_gt_dmx_alloc_queue_teletext
insmod: unresolved symbol avia_gt_dmx_enable_clip_mode
insmod: unresolved symbol avia_gt_dmx_disable_framer
insmod: unresolved symbol avia_gt_dmx_disable_clip_mode
insmod: unresolved symbol avia_av_napi_decoder_start
insmod: unresolved symbol avia_gt_dmx_queue_start
insmod: unresolved symbol avia_gt_dmx_tap
insmod: unresolved symbol avia_gt_get_info
insmod: unresolved symbol avia_gt_dmx_enable_framer
insmod: unresolved symbol avia_gt_dmx_alloc_queue_video
insmod: unresolved symbol avia_gt_dmx_free_queue
insmod: unresolved symbol avia_gt_dmx_alloc_queue_audio
insmod: unresolved symbol avia_gt_dmx_alloc_queue_user
insmod: unresolved symbol avia_gt_dmx_get_stc
insmod: unresolved symbol avia_gt_accel_crc32
Using /lib/modules/2.4.27-dbox2/misc/dvb2eth.o
insmod: unresolved symbol avia_gt_napi_dvr_send
Using /lib/modules/2.4.27-dbox2/misc/aviaEXT.o
insmod: unresolved symbol avia_av_write
insmod: unresolved symbol avia_gt_set_playback_mode
insmod: unresolved symbol avia_gt_get_playback_mode
insmod: unresolved symbol avia_av_is500
insmod: unresolved symbol avia_av_read
insmod: unresolved symbol avia_av_new_audio_config
$Id: chkIVersion.cpp,v 1.6 2005/02/08 22:30:05 mogway Exp $
Using /lib/modules/2.4.27-dbox2/kernel/net/sunrpc/sunrpc.o
Yadi Release vom 16.03.2005 19:53 - Image-Version 2.1.0.0
Networkcfg eth0: 192.168.188.3/255.255.255.0 gw 192.168.188.1
Startmode: Bootmenu - HWSn
Using /lib/modules/2.4.27-dbox2/kernel/fs/lockd/lockd.o
Using /lib/modules/2.4.27-dbox2/kernel/fs/nfs/nfs.o
Using /lib/modules/2.4.27-dbox2/kernel/fs/cifs/cifs.o
Starting pid 92, console /dev/console: '/etc/init.d/start'

 

AW: loading kernel...

TEIL3

Please press Enter to activate this console. $Id: sectionsd.cpp,v 1.181 2005/03/
08 13:39:08 metallica Exp $
caching 504 hours
events are old 180min after their end time
[sectionsd] open dmx: No such file or directory
[sectionsd] open dmx: No such file or directory
[sectionsd] getUTC: open: No such file or directory
[ConfigFile] Unable to open file /var/tuxbox/config/timerd.conf for reading.
[camd] /dev/dvb/adapter0/demux0: No such file or directory
$Id: zapit.cpp,v 1.370 2005/03/14 19:58:48 mws Exp $
[ConfigFile] Unable to open file /var/tuxbox/config/zapit/zapit.conf for reading
.
/share/tuxbox/satellites.xml: No such file or directory
[sectionsd] getUTC: open: No such file or directory
[getservices] satellites.xml not found.
/var/tuxbox/config/zapit/services.xml: No such file or directory
[audio.cpp:CAudio:34] /dev/dvb/adapter0/audio0: No such file or directory
[video.cpp:CVideo:33] /dev/dvb/adapter0/video0: No such file or directory
[sectionsd] open dmx: No such file or directory
[aviaext.cpp:CAViAext:37] /dev/dbox/aviaEXT: No such file or directory
[sectionsd] open dmx: No such file or directory
$Id: controld.cpp,v 1.117 2004/05/22 14:34:09 carjay Exp $

[controld] Boxtype detected: (1, Nokia D-BOX2)
[controld] /dev/dvb/adapter0/video0: No such file or directory
[controld] /dev/dvb/adapter0/video0: No such file or directory
[sectionsd] getUTC: open: No such file or directory
[nhttpd] Neutrino HTTP-Server starting..
[sectionsd] open dmx: No such file or directory
[sectionsd] getUTC: open: No such file or directory
[sectionsd] open dmx: No such file or directory
[sectionsd] open dmx: No such file or directory
[sectionsd] getUTC: open: No such file or directory
[sectionsd] open dmx: No such file or directory
[neutrino] frameBuffer Instance created
/dev/fb/0: No such file or directory
framebuffer not available.
FBIOPUT_VSCREENINFO: Bad file descriptor
FBIOGET_FSCREENINFO: Bad file descriptor
[neutrino] Error while setting framebuffer mode
[ConfigFile] Unable to open fi[sectionsd] getUTC: open: No such file or director
y
zapit shot down
le /var/tuxbox/config/zapit/zapit.conf for writing.
[sectionsd] open dmx: No such file or directory
Waiting for controld (max. 9 seconds)
[sectionsd] getUTC: open: No such file or directory
[sectionsd] open dmx: No such file or directory
[sectionsd] open dmx: No such file or directory
Waiting for controld (max. 8 seconds)
[sectionsd] getUTC: open: No such file or directory
[sectionsd] open dmx: No such file or directory
[sectionsd] open dmx: No such file or directory
Waiting for controld (max. 7 seconds)
[sectionsd] getUTC: open: No such file or directory
[sectionsd] getUTC: open: No such file or directory
[sectionsd] open dmx: No such file or directory
[sectionsd] open dmx: No such file or directory
Waiting for controld (max. 6 seconds)
[sectionsd] getUTC: open: No such file or directory
[sectionsd] open dmx: No such file or directory
[sectionsd] open dmx: No such file or directory
Waiting for controld (max. 5 seconds)
[sectionsd] getUTC: open: No such file or directory
[sectionsd] open dmx: No such file or directory
Waiting for controld (max. 4 seconds)
[sectionsd] getUTC: open: No such file or directory
[sectionsd] open dmx: No such file or directory
[sectionsd] open dmx: No such file or directory
[sectionsd] getUTC: open: No such file or directory
Waiting for controld (max. 3 seconds)
[sectionsd] open dmx: No such file or directory
[sectionsd] getUTC: open: No such file or directory
[sectionsd] open dmx: No such file or directory
Waiting for controld (max. 2 seconds)
[sectionsd] getUTC: open: No such file or directory
[sectionsd] open dmx: No such file or directory
[sectionsd] open dmx: No such file or directory
Waiting for controld (max. 1 seconds)
[sectionsd] getUTC: open: No such file or directory
[sectionsd] open dmx: No such file or directory
[sectionsd] open dmx: No such file or directory
Starting pid 180, console /dev/console: '/bin/switch'
CXA2092 found
[sectionsd] getUTC: open: No suc[nhttpd] stop requested......
Sending SIGKILL to all processes.
The system is halted. Press Reset or turn off power

 

AW: loading kernel...

Mhhh... Einen Hau hat das Teil auf jedenfall weg.
Ich bleibe bei meiner Diagnose "Alzheimer im fortgeschrittenen Stadium".

Du kannst aber gerne nochmal im Tuxboxforum/Harware diese Logs posten und auch nachgfragen was eine Reparatur kosten würde. (dürfte sich aber noch lohnen da es ja eine Satbox ist.

Man könnte auch nochmal ein yadd (nicht yadi!) starten und dann sehen ob die Box läuft.
Da dann der Flash der Box nicht genutzt wird könnte es meine Diagnose bestätigen oder verwerfen.
Ich weis jetzt aber nicht ob noch jemand yadds zur Verfügung stellt.

Gruß Gorcon

 

AW: loading kernel...

Neuester Stand:

Nach dem Flashen eines Images fährt die Box problemlos hoch und ich komm zu der Eingabe von den Netzwerkdaten...Box startet dann und ich kann problemlos in den Menüs zappen.
Dann spiele ich die ucodes ein und stecke die Dbox aus. Stecke wieder ein. Und die Box läßt sich nicht mehr hoch fahren!
Es kommen dann zuhauf Fehlermeldungen (siehe oben)
Wenn ich ein Enigma Image installiere, hängt sich die Box im Übrigen total auf...sonst schaltet sie sich nach einer Zeit von selbst ab...
scheint wohl wirklich was kaputt zu sein oder liegts nur an der Software...

 

AW: loading kernel...

Sehe ich auch so.

Nach dem neu-flashen sind ja alle Daten/Einstellungen/Verzeichnisse vorhanden, aber nach dem Neustart der Box sind sie weg.
Also kann die Box nicht mehr richtig speichern, wo das allerdings herkommt ?
Da hat bestimmt der RAM einen an der Klatsche.

 

AW: loading kernel...

na gut, wenigstens weiß ich jetzt dass es nicht an mir liegt sondern an der Box!
Ein schwacher Trost, das Ding hat mich glaub ich 120€ gekostet! Is ja ne super Spezialausführung in silber...*lol* sieht wie selbst lackiert aus...hauptsache aber teurer als eine schwarze!
Steht jetzt Monate schon herum und nun dass...

 

AW: loading kernel...

Tach zusammen,

hab hier auch mal n Problem mit dem Stehenbleiben bei "loading kernel". Vielleicht findet ihr ja nen Fehler im log. Hab schon diverseste images durch mit flashassi oder nur mit bootmanager und flashen ohne Nullmodem mit der exra ppcboot aber das gude Stück will irgendwie nich. Naja, vielleicht habt ihr ja noch ne Idee. *hoff*

Code:

ÿdebug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: BMon V1.0  mID 01
debug: feID dd    gtxID 0b
debug: fpID 5a     dsID 01-21.d5.25.07.00.00-bb
debug: HWrev X5  SWrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
debug: autoboot aborted from terminal
dbox2:root> 
dbox2:root> boot net net net net net net net net net net
debug: 
BOOTP/TFTP bootstrap loader (v0.3)
debug: 
debug: Transmitting BOOTP request via broadcast
debug: Got BOOTP reply from Server IP 192.168.1.2, My IP 192.168.1.202
debug: Sending TFTP-request for file G/ppcboot45802/ppcboot_nullmodem
debug: Got Block #0050
debug: Got Block #0050
debug: Got Block #0100
debug: Got Block #0150
debug: Got Block #0200
debug: Got Block #0250
debug: Got Block #0300
debug: Got Block #0350
will verify ELF image, start= 0x800000, size= 201596
verify sig: 262
boot net: boot file has no valid signature
Branching to 0x40000


ppcboot 0.6.4 (Apr 11 2002 - 16:10:44)

Initializing...
  CPU:   PPC823ZTnnA at 67 MHz: 2 kB I-Cache 1 kB D-Cache
         *** Warning: CPU Core has Silicon Bugs -- Check the Errata ***
  Board: ### No HW ID - assuming TQM8xxL
  DRAM:  (faked) 32 MB
  Ethernet: 00-50-9c-19-23-75
  FLASH:  8 MB
  LCD driver (KS0713) initialized
BOOTP broadcast 1
TFTP from server 192.168.1.2; our IP address is 192.168.1.202
Filename 'G/tftpboot/logo-lcd'.
Load address: 0x130000
Loading: *##
done
  LCD logo at: 0x130000 (0x1F9FFC0 bytes)
BOOTP broadcast 1
TFTP from server 192.168.1.2; our IP address is 192.168.1.202
Filename 'G/tftpboot/logo-fb'.
Load address: 0x120000
Loading: *####################################
done
  FB logo at: 0x0 (0x1FC0000 bytes)
€debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: WATCHDOG RESET
debug: BMon V1.0  mID 01
debug: feID dd    gtxID 0b
debug: fpID 5a     dsID 01-21.d5.25.07.00.00-bb
debug: HWrev X5  SWrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
debug: autoboot aborted from terminal
dbox2:root> 
dbox2:root> boot net net net net net net net net net net
debug: 
BOOTP/TFTP bootstrap loader (v0.3)
debug: 
debug: Transmitting BOOTP request via broadcast
debug: Got BOOTP reply from Server IP 192.168.1.2, My IP 192.168.1.202
debug: Sending TFTP-request for file G/ppcboot45802/ppcboot_nullmodem
debug: Got Block #0050
debug: Got Block #0050
debug: Got Block #0100
debug: Got Block #0150
debug: Got Block #0200
debug: Got Block #0250
debug: Got Block #0300
debug: Got Block #0350
will verify ELF image, start= 0x800000, size= 201596
verify sig: 262
boot net: boot file has no valid signature
Branching to 0x40000


ppcboot 0.6.4 (Apr 11 2002 - 16:10:44)

Initializing...
  CPU:   PPC823ZTnnA at 67 MHz: 2 kB I-Cache 1 kB D-Cache
         *** Warning: CPU Core has Silicon Bugs -- Check the Errata ***
  Board: ### No HW ID - assuming TQM8xxL
  DRAM:  (faked) 32 MB
  Ethernet: 00-50-9c-19-23-75
  FLASH:  8 MB
  LCD driver (KS0713) initialized
BOOTP broadcast 1
TFTP from server 192.168.1.2; our IP address is 192.168.1.202
Filename 'G/tftpboot/logo-lcd'.
Load address: 0x130000
Loading: *##
done
  LCD logo at: 0x130000 (0x1F9FFC0 bytes)
BOOTP broadcast 1
TFTP from server 192.168.1.2; our IP address is 192.168.1.202
Filename 'G/tftpboot/logo-fb'.
Load address: 0x120000
Loading: *####################################
done
  FB logo at: 0x0 (0x1FC0000 bytes)
€debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: WATCHDOG RESET
debug: BMon V1.0  mID 01
debug: feID dd    gtxID 0b
debug: fpID 5a     dsID 01-21.d5.25.07.00.00-bb
debug: HWrev X5  SWrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
debug: autoboot aborted from terminal
dbox2:root> 
dbox2:root> boot net net net net net net net net net net
debug: 
BOOTP/TFTP bootstrap loader (v0.3)
debug: 
debug: Transmitting BOOTP request via broadcast
debug: Got BOOTP reply from Server IP 192.168.1.2, My IP 192.168.1.202
debug: Sending TFTP-request for file G/ppcboot45802/ppcboot_nullmodem
debug: Got Block #0050
debug: Got Block #0050
debug: Got Block #0100
debug: Got Block #0150
debug: Got Block #0200
debug: Got Block #0250
debug: Got Block #0300
debug: Got Block #0350
will verify ELF image, start= 0x800000, size= 201596
verify sig: 262
boot net: boot file has no valid signature
Branching to 0x40000


ppcboot 0.6.4 (Apr 11 2002 - 16:10:44)

Initializing...
  CPU:   PPC823ZTnnA at 67 MHz: 2 kB I-Cache 1 kB D-Cache
         *** Warning: CPU Core has Silicon Bugs -- Check the Errata ***
  Board: ### No HW ID - assuming TQM8xxL
  DRAM:  (faked) 32 MB
  Ethernet: 00-50-9c-19-23-75
  FLASH:  8 MB
  LCD driver (KS0713) initialized
BOOTP broadcast 1
TFTP from server 192.168.1.2; our IP address is 192.168.1.202
Filename 'G/tftpboot/logo-lcd'.
Load address: 0x130000
Loading: *##
done
  LCD logo at: 0x130000 (0x1F9FFC0 bytes)
BOOTP broadcast 1
TFTP from server 192.168.1.2; our IP address is 192.168.1.202
Filename 'G/tftpboot/logo-fb'.
Load address: 0x120000
Loading: *####################################
done
  FB logo at: 0x0 (0x1FC0000 bytes)
€debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: WATCHDOG RESET
debug: BMon V1.0  mID 01
debug: feID dd    gtxID 0b
debug: fpID 5a     dsID 01-21.d5.25.07.00.00-bb
debug: HWrev X5  SWrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
debug: autoboot aborted from terminal
dbox2:root> boot net net net net net net net net net net
debug: 
BOOTP/TFTP bootstrap loader (v0.3)
debug: 
debug: Transmitting BOOTP request via broadcast
debug: Got BOOTP reply from Server IP 192.168.1.2, My IP 192.168.1.202
debug: Sending TFTP-request for file G/ppcboot45802/ppcboot_nullmodem
debug: Got Block #0050
debug: Got Block #0050
debug: Got Block #0100
debug: Got Block #0150
debug: Got Block #0200
debug: Got Block #0250
debug: Got Block #0300
debug: Got Block #0350
will verify ELF image, start= 0x800000, size= 201596
verify sig: 262
boot net: boot file has no valid signature
Branching to 0x40000


ppcboot 0.6.4 (Apr 11 2002 - 16:10:44)

Initializing...
  CPU:   PPC823ZTnnA at 67 MHz: 2 kB I-Cache 1 kB D-Cache
         *** Warning: CPU Core has Silicon Bugs -- Check the Errata ***
  Board: ### No HW ID - assuming TQM8xxL
  DRAM:  (faked) 32 MB
  Ethernet: 00-50-9c-19-23-75
  FLASH:  8 MB
  LCD driver (KS0713) initialized
BOOTP broadcast 1
TFTP from server 192.168.1.2; our IP address is 192.168.1.202
Filename 'G/tftpboot/logo-lcd'.
Load address: 0x130000
Loading: *##
done
  LCD logo at: 0x130000 (0x1F9FFC0 bytes)
BOOTP broadcast 1
TFTP from server 192.168.1.2; our IP address is 192.168.1.202
Filename 'G/tftpboot/logo-fb'.
Load address: 0x120000
Loading: *####################################
done
  FB logo at: 0x0 (0x1FC0000 bytes)
€debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: WATCHDOG RESET
debug: BMon V1.0  mID 01
debug: feID dd    gtxID 0b
debug: fpID 5a     dsID 01-21.d5.25.07.00.00-bb
debug: HWrev X5  SWrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
debug: autoboot aborted from terminal
dbox2:root> boot net net net net net net net net net net
debug: 
BOOTP/TFTP bootstrap loader (v0.3)
debug: 
debug: Transmitting BOOTP request via broadcast
debug: Got BOOTP reply from Server IP 192.168.1.2, My IP 192.168.1.202
debug: Sending TFTP-request for file G/ppcboot45802/ppcboot_nullmodem
debug: Got Block #0050
debug: Got Block #0050
debug: Got Block #0100
debug: Got Block #0150
debug: Got Block #0200
debug: Got Block #0250
debug: Got Block #0300
debug: Got Block #0350
will verify ELF image, start= 0x800000, size= 201596
verify sig: 262
boot net: boot file has no valid signature
Branching to 0x40000


ppcboot 0.6.4 (Apr 11 2002 - 16:10:44)