1. Cookies optimieren die Bereitstellung unserer Dienste. Mit der Nutzung unserer Dienste erklärst Du dich damit einverstanden, dass wir Cookies verwenden. Weitere Informationen
    Information ausblenden
  2. Willkommen im Forum von DIGITAL FERNSEHEN - dem führenden Portal für digitales Fernsehen, Medien und Entertainment. Wenn du hier neu bist, schau dich ruhig etwas um und melde dich an, um am Forengeschehen teilnehmen zu können.
    Information ausblenden

Bildaussetzer bei DBOX2

Dieses Thema im Forum "d-box 1 und d-box 2" wurde erstellt von aralos, 8. Mai 2006.

  1. aralos

    aralos Neuling

    Registriert seit:
    8. Mai 2006
    Beiträge:
    9
    Zustimmungen:
    0
    Punkte für Erfolge:
    1
    Anzeige
    AW: Bildaussetzer bei DBOX2

    So, jetzt kann ich den Bootlog nachliefern:

    ½debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
    debug: BMon V1.0 mID 01
    debug: feID 7a gtxID 0b
    debug: fpID 5a dsID 01-6d.a5.19.07.00.00-84
    debug: HWrev X5 SWrev 0.81
    debug: B/Ex/Fl(MB) 32/00/08
    WATCHDOG reset enabled
    dbox2:root> debug:
    BOOTP/TFTP bootstrap loader (v0.3)
    debug:
    debug: Transmitting BOOTP request via broadcast
    debug: Given up BOOTP/TFTP boot
    boot net failed

    Flash-FS bootstrap loader (v1.5)

    Found Flash-FS superblock version 3.1
    Found file /root/platform/nokia-dbox2/kernel/o
    debug: Got Block #0036

    will verify ELF image, start= 0x800000, size= 160940
    verify sig: 263
    Branching to 0x40000


    U-Boot 1.1.2 (Tuxbox) (May 26 2005 - 16:37:05)

    CPU: PPC823ZTnnA at 67.200 MHz: 2 kB I-Cache 1 kB D-Cache
    *** Warning: CPU Core has Silicon Bugs -- Check the Errata ***
    Board: DBOX2, Nokia, BMon V1.0
    Watchdog enabled
    I2C: ready
    DRAM: 32 MB
    FLASH: 8 MB
    Scanning JFFS2 FS: . done.
    FB: ready
    LCD: ready
    In: serial
    Out: serial
    Err: serial
    Net: SCC ETHERNET

    Options:
    1: Console on null
    2: Console on ttyS0
    3: Console on framebuffer
    Select option (1-3), other keys to stop autoboot: 0
    ### FS (squashfs) loading 'vmlinuz' to 0x100000
    ### FS load complete: 638456 bytes loaded to 0x100000
    ...............................................................
    Un-Protected 63 sectors
    ## Booting image at 00100000 ...
    Image Name: dbox2
    Image Type: PowerPC Linux Kernel Image (gzip compressed)
    Data Size: 638392 Bytes = 623.4 kB
    Load Address: 00000000
    Entry Point: 000
    Verifying Checksum ... OK
    Uncompressing Kernel Image ... OK
    Linux version 2.4.27-dbox2 (ImageTeam@yadi.org) (gcc version 3.3.5) #2 Do Mai 26
    17:25:49 CEST 2005
    On node 0 totalpages: 8192
    zone(0): 8192 pages.
    zone(1): 0 pages.
    zone(2): 0 pages.
    Kernel command line: console=ttyS0 root=/dev/mtdblock1 rootfstype=squashfs
    Decrementer Frequency = 252000000/60
    m8xx_wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)
    m8xx_wdt: keep-alive trigger installed (PITC: 0x12C0)
    Console: colour dummy device 80x25
    Calibrating delay loop... 66.96 BogoMIPS
    Memory: 30880k available (1088k kernel code, 340k data, 60k init, 0k highmem)
    Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
    Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
    Mount cache hash table entries: 512 (order: 0, 4096 bytes)
    Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
    Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
    POSIX conformance testing by UNIFIX
    Linux NET4.0 for Linux 2.4
    Based upon Swansea University Co
    Initializing RT netlink socket
    Starting kswapd
    devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
    devfs: boot_options: 0x1
    JFFS2 version 2.2. (C) 2001-2003 Red Hat, Inc.
    Squashfs 2.1-r2 (released 2004/12/15) (C) 2002-2004 Phillip Lougher
    i2c-core.o: i2c core module version 2.6.1 (20010830)
    i2c-dev.o: i2c /dev entries driver module version 2.6.1 (20010830)
    CPM UART driver version 0.04
    ttyS0 at 0x0280 is on SMC1 using BRGttyS1 at 0x0380 is on SMC2 using BRG2
    pty: 256 Unix98 ptys configured
    eth0: CPM ENET Version 0.2.dbox2 on SCC2, 00:50:9c:1d:06:81
    loop: loaded (max 8 devices)
    D-Box 2 flash driver (size->0x800000 mem->0x10000000)
    D-Box 2 flash memory: Found 2 x16 devices at 0x0 in 32-bit mode
    Intel/Sharp Extended Query Table at 0x0035
    cfi_cmdset_0001: Erase suspend on write enabled
    Using word write method
    Creating 6 MTD partitions on "D-Box 2 flash memory":
    0x00000000-0x00020000 : "BR bootloader"
    0x00020000-0x00680000 : "root (squashfs)"
    0x00680000-0x007e0000 : "var (jffs2)"
    0x007e0000-0x00800000
    0x00020000-0x00800000 : "flash without bootloader"
    0x00000000-0x00800000 : "complete flash"
    Linux video capture interface: v1.00
    mice: PS/2 mouse device common for all mice
    NET4: Linux TCP/IP 1.0 for NET4.0
    IP Protocols: ICMP, UDP, TCP, IGMP
    IP: routing cache hash table of 512 buckets, 4Kbytes
    TCP: Hash tables configured (established 2048 bind 4096)
    Linux IP multicast router 0.06 plus PIM-SM
    NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
    VFS: Mounted root (squashfs filesystem) readonly.
    Mounted devfs on /dev
    Freeing unused kernel memory: 60k init
    Starting pid 10, console /dev/console: '/etc/init.d/rcS'ti-call b
    Using /lib/modules/2.4.27-dbox2/misc/event.o
    event: $Id: event.c,v 1.12 2003/09/30 05:45:38 obi Exp $
    Using /lib/modules/2.4.27-dbox2/misc/tuxbox.o
    Using /lib/modules/2.4.27-dbox2/misc/dvb-core.o
    Using /lib/modules/2.4.27-dbox2/misc/dbox2_i2c.o
    [i2c-8xx]: mpc 8xx i2c init
    [i2c-8xx]: adapter: 0
    Using /lib/modules/2.4.27-dbox2/misc/dbox2_fp.o
    Using /lib/modules/2.4.27-dbox2/misc/dbox2_fp_input.o
    Using /lib/modules/2.4.27-dbox2/misc/avs.o
    Using /lib/modules/2.4.27-dbox2/misc/saa7126.o
     
  2. aralos

    aralos Neuling

    Registriert seit:
    8. Mai 2006
    Beiträge:
    9
    Zustimmungen:
    0
    Punkte für Erfolge:
    1
    AW: Bildaussetzer bei DBOX2

    Detected STB:
    Vendor: Nokia
    Model: D-BOX2
    Using /lib/modules/2.4.27-dbox2/misc/cam.o
    $Id: cam.c,v 1.30 2004/01/10 16:36:34 alexw Exp $
    Using /lib/modules/2.4.27-dbox2/misc/dvb_i2c_bridge.o
    Using /lib/modules/2.4.27-dbox2/misc/avia_napi.o
    $Id: avia_napi.c,v 1.18 2003/11/24 09:53:01 obi Exp $
    DVB: registering new adapter (C-Cube AViA GTX/eNX with AViA 500/600).
    dvb_i2c_bridge: enabled DVB i2c bridge to PowerPC 8xx I2C adap
    Using /lib/modules/2.4.27-dbox2/misc/cam_napi.o
    $Id: cam_napi.c,v 1.8 2003/09/30 05:45:34 obi Exp $
    Using /lib/modules/2.4.27-dbox2/misc/dbox2_fp_napi.o
    Thu Jan 1 01:00:00 CET 1970
    Using /lib/modules/2.4.27-dbox2/misc/avia_av.o
    avia_av: $Id: avia_av_core.c,v 1.98 2004/11/21 20:33:38 carjay Exp $
    avia_av_core: Starting avia_av_wdt thread.
    avia_av: microcode verify: 3 errors.
    avia_av_event: $Id: avia_av_event.c,v 1.11 2003/10/26 16:32:51 obi Exp $
    avia_av_proc: $Id: avia_av_proc.c,v 1.14 2004/01/21 20:02:29 carja
    Using /lib/modules/2.4.27-dbox2/misc/avia_gt.o
    avia_gt_core: $Id: avia_gt_core.c,v 1.48 2004/12/20 01:01:22 carjay Exp $
    avia_gt_core: autodetecting chip type... GTX
    avia_gt_gtx: $Id: avia_gt_gtx.c,v 1.24 2003/09/30 05:45:35 obi Exp $
    avia_gt_accel: $Id: avia_gt_accel.c,v 1.19 2003/09/30 05:45:35 obi Exp $
    avia_gt_dmx: $Id: avia_gt_dmx.c,v 1.210 2004/06/26 16:08:15 carjay Exp $
    avia_gt_core: masking unhandled irq reg 1 bit 11
    avia_gt_core: masking unhandled irq reg 1 bit 13
    avia_gt_ucode: loaded ucode v0014
    avia_gt_ucode: ucode section filters enabled.
    avia_gt_dmx: warning, misaligned queue 0 (is 0xFD200, size 65536), aligning...
    avia_gt_core: masking unhandled irq reg 0 bit 6
    avia_gt_gv: $Id: avia_gt_gv.c,v 1.39 2004/08/28 16:44:56 carjay Exp $
    avia_gt_gv: set_input_size (width=720, height=576)
    avia_gt_pcm: $Id: avia_gt_pcm.c,v 1.29 2004/01/29 19:38:20 zwen Exp $
    avia_gt_pcm_set_rate(44100)
    avia_gt_capture: $Id: avia_gt_capture.c,v 1.32 2003/09/30 05:45:35 obi Exp $
    avia_gt_pig: $Id: avia_gt_pig.c,v 1.40 2003/09/
    avia_gt_vbi: $Id: avia_gt_vbi.c,v 1.26 2003/08/01 17:31:22 obi Exp $
    avia_gt_core: Loaded AViA eNX/GTX driver
    Using /lib/modules/2.4.27-dbox2/misc/avia_gt_fb.o
    avia_gt_fb: $Id: avia_gt_fb_core.c,v 1.54 2004/03/17 18:42:18 zwen Exp $
    avia_gt_gv: set_input_mode (mode=2)
    avia_gt_gv: set_input_size (width=720, height=576)
    avia_gt_gv: set_input_mode (mode=2)
    avia_gt_gv: set_input_size (width=720, height=576)
    avia_gt_gv: set_input_mode (mode=2)
    avia_gt_gv: set_input_size (width=720, height=576)
    Console: switching to colour frame buffer device 82x32
    avia_gt_fb: fb0: AViA eNX/GTX Framebuffer frame buffer device
    Using /lib/modules/2.4.27-dbox2/misc/lcd.o
    lcd.o: init lcd driver module
    lcd.o: found KS0713/SED153X lcd interface
    Using /lib/modules/2.4.27-dbox2/misc/avia_gt_lirc.o
    avia_gt_lirc: $Id: avia_gt_lirc.c,v 1.14 2003/09/30 05:45:35 obi Exp $
    avia_gt_ir: $Id: avia_gt_ir.c,v 1.30 2003/09/30 05:45:35 obi Exp $
    Using /lib/modules/2.4.27-dbox2/misc/avia_gt_oss.o
    avia_oss: $Id: avia_gt_oss.c,v 1.26 2004/05/
    avia_gt_pcm_set_rate(44100)
    Using /lib/modules/2.4.27-dbox2/misc/avia_gt_v4l2.o
    avia_gt_v4l2: $Id: avia_gt_v4l2.c,v 1.12 2003/09/30 04:54:03 obi Exp $
    Using /lib/modules/2.4.27-dbox2/misc/ves1820.o
    DVB: VES1820(0): pwm=0x48
    DVB: registering frontend 0:0 (VES1820 based DVB-C frontend)...
    Using /lib/modules/2.4.27-dbox2/misc/ves1x93.o
    Using /lib/modules/2.4.27-dbox2/misc/avia_av_napi.o
    avia_av_napi.c: $Id: avia_av_napi.c,v 1.33 2004/03/11 15:30:27 derget Exp $
    Using /lib/modules/2.4.27-dbox2/misc/avia_gt_napi.o
    avia_gt_napi: $Id: avia_gt_napi.c,v 1.203 2005/01/05 05:49:56 carjay Exp $
    Using /lib/modules/2.4.27-dbox2/misc/dvb2eth.o
    Using /lib/modules/2.4.27-dbox2/misc/aviaEXT.o
    /etc/init.d/rcS: 162: cannot create /etc/issue.net: No space left on device
    Using /lib/modules/2.4.27-dbox2/kernel/net/sunrpc/sunrpc.o
    $Id: chkIVersion.cpp,v 1.6 2005/02/08 22:30:05 mogway Exp $
    Yadi Snapshot vom 26.05.2005 15:51 - Image-Version 2.1.0.3
    Networkcfg eth0: 192.168.1.103/255.255.255.0 gw 192.168.1.1
    Startmode: Bootmenu - HWS:eek:n
    Using /lib/modules/2.4.27-dbox2/kernel/fs/lockd/lockd.o
    Using /lib/modules/2.4.27-dbox2/kernel/fs/nfs/nfs.o
    Using /lib/modules/2.4.27-dbox2/kernel/fs/cifs/cifs.o
    Starting pid 92, console /dev/console: '/etc/init.d/start'

    Please press Enter to activate this console. $Id: sectionsd.cpp,v 1.184 2005/05/
    02 19:06:35 rasc Exp $
    caching 504 hours
    events are old 180min after their end time
    [camd] ca system id: 1722
    $Id: zapit.cpp,v 1.371 2005/04/17 06:56:15 metallica Exp $
    avia_gt_core: masking unhandled irq reg 0 bit
    /var/tuxbox/config/zapit/antiservices.xml: No such file or directory
    [getservices] /var/tuxbox/config/zapit/myservices.xml found.
    $Id: controld.cpp,v 1.117 2004/05/22 14:34:09 carjay Exp $

    [controld] Boxtype detected: (1, Nokia D-BOX2)
    [nhttpd] Neutrino HTTP-Server starting..
    [camd] no card is in slot #2
    [camd] no card is in slot #1
    [neutrino] frameBuffer Instance created
    812k video mem
    avia_gt_gv: set_input_mode (mode=2)
    avia_gt_gv: set_input_size (width=720, height=576)
    [neutrino] Software update enabled
    [neutrino] enable flash
    [lcdd] time-skin not found -> using default...
    [lcdd] weekday-skin not found -> using default...
    [lcdd] date-skin not found -> using default...
    [lcdd] month-skin not found -> using default...
    [LCDFONT] initializing core...
    [LCDFONT] adding font /share/fonts/12.pcf.gz...OK (Fix12/Regular)
    [LCDFONT] adding font /share/fonts/14B.pcf.gz...OK (Fix14/Bold)
    [LCDFONT] adding font /share/fonts/15B.pcf.gz...OK (Fix15/Bold)
    [LCDFONT] Intializing font cache...
    [LCDFONT] FTC_Face_Requester (Fix15/Bold)
    [LCDFONT] FTC_Face_Requester (Fix14/Bold)
    /dev/input/event1: No such file or directory
    [neutrino] menue setup
    loading locales: scandir: No such file or directory
    [neutrino] registering as event client
    [neutrino] initialized everything
    zap failed!
    [sectionsd] getUTC: read: Connection timed out
     
  3. Gorcon

    Gorcon Kanzler Premium

    Registriert seit:
    15. Januar 2001
    Beiträge:
    156.446
    Zustimmungen:
    31.430
    Punkte für Erfolge:
    273
    Technisches Equipment:
    VU+ Uno 4K SE mit Neutrino HD + VTi
    AW: Bildaussetzer bei DBOX2

    Da ist der Avia defekt. Auch hier nachzulesen.

    Gruß Gorcon
     
  4. aralos

    aralos Neuling

    Registriert seit:
    8. Mai 2006
    Beiträge:
    9
    Zustimmungen:
    0
    Punkte für Erfolge:
    1
    AW: Bildaussetzer bei DBOX2

    lohnt sich der Austausch?
     
  5. Gorcon

    Gorcon Kanzler Premium

    Registriert seit:
    15. Januar 2001
    Beiträge:
    156.446
    Zustimmungen:
    31.430
    Punkte für Erfolge:
    273
    Technisches Equipment:
    VU+ Uno 4K SE mit Neutrino HD + VTi
    AW: Bildaussetzer bei DBOX2

    kaum. Was ich bis jetzt gelesen habe kostet der Austausch ca. 80€.

    Gruß Gorcon