Hilfe mit Image

Anzeige

Hallo Leute

Ich brauche unbedingt Hilfe,habe schon alles ausprobiert. entt&aum

Ich bekomme kein neues Image mehr drauf per Bootmanager und auch nicht per Neutrino.
Bei Neutrino zeigt er mir immer an wenn ich das Image einspielen will Datei nicht lesbar
und beim Bootmanager nach dem Reseten fährt er einfach das alte Image hoch und geht nicht in denn Boot Modus. Was mache ich Falsch oder kann mir einer jemand einen Tip geben. durchein

MfG Glums

 

Wenn Du das Image per Neutrino flashen willst dürfen im Dateinamen keine Großbuchstaben oder Leerzeichen sein.
Gruß Gorcon

 

Was Du falsch machst weiß ich nicht,
was machst Du überhaupt?
Wenn Du die 1.7.1 neu flashen willst,dann mußt Du
das auch mit dem Image flashen Schalter machen im Bootmanager.
Image flashen und immer ok bestätigen und dann die Box resetten.

 

Sonst klappte es ja auch immer wunderbar er zeigt mir auch eine Meldung im Bootmanager unter RSH-Clint wo drinne steht:

*** Achtung: RSH ist bei fast allen Linux-Images nicht konfiguriert/aktiviert!
*** RSH wird also nur funktionieren, falls ihr euren Linux-Kernel gepatcht habt

und unter Com-Terminal:

debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed

Flash-FS bootstrap loader (v1.5)

Found Flash-FS superblock version 3.1
Found file /root/platform/philips-dbox2/kernel/os in Flash-FS
debug: Got Block #0036

will verify ELF image, start= 0x800000, size= 143000
verify sig: 262
Branching to 0x40000


U-Boot 0.4.0 (TuxBox) JFFS2 only (Aug 15 2003 - 16:44:21)

CPU: PPC823ZTnnB2 at 66 MHz: 2 kB I-Cache 1 kB D-Cache
Board: DBox2, Phillips -- Watchdog enabled
I2C: ready
DRAM: 32 MB
FLASH: 8 MB
LCD: ready
FB: ready
In: serial
Out: serial
Err: serial
Net: SCC ETHERNET
Scanning JFFS2 FS: ......... done.

### FS (jffs2) loading 'var/tuxbox/boot/logo-lcd'
### FS (jffs2) loading 'var/tuxbox/boot/logo-fb'
### FS (jffs2) loading 'var/tuxbox/boot/ppcboot.conf'
### FS (jffs2) loading 'var/tuxbox/boot/u-boot.conf'
### FS (jffs2) loading 'vmlinuz'
...............................................................
Un-Protected 63 sectors
## Booting image at 00100000 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 599504 Bytes = 585.5 kB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Linux version 2.4.22-dbox2 (tuxbox@debian) (gcc version 3.2.3) #3 Di Dez 2 14:38
:26 CET 2003
Jffs2-only Skars-Kernel mit NFS/CIFS/SMB Module-Support folgender
Aufteilung:128k BRbootloader,128k flfs(ppcboot),7936k root(jffs2)
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: root=/dev/mtdblock2 rw console=ttyS0
Decrementer Frequency = 247500000/60
mpc8xx-wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)
mpc8xx-wdt: keep-alive trigger activated (PITC: 0x2000)
Console: colour dummy device 80x25
Calibrating delay loop... 65.74 BogoMIPS
Memory: 30936k available (1036k kernel code, 336k data, 60k init, 0k highmem)
Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
JFFS2 version 2.1. (C) 2001, 2002 Red Hat, Inc., designed by Axis Communications
AB.
i2c-core.o: i2c core module
CPM UART driver version 0.03
ttyS00 at 0x0280 is a SMC
ttyS01 at 0x0380 is a SMC
pty: 256 Unix98 ptys configured
eth0: CPM ENET Version 0.2 on SCC2, 00:50:9c:2d:75:a1
D-Box 2 flash driver (size->0x800000 mem->0x10000000)
D-Box 2 flash memory: Found 2 x16 devices at 0x0 in 32-bit mode
Intel/Sharp Extended Query Table at 0x0035
cfi_cmdset_0001: Erase suspend on write enabled
Using word write method
Creating 5 MTD partitions on "D-Box 2 flash memory":
0x00000000-0x00020000 : "BR bootloader"
0x00020000-0x00040000 : "flfs (ppcboot)"
0x00040000-0x00800000 : "root (jffs2)"
0x00020000-0x00800000 : "flash without bootloader"
0x00000000-0x00800000 : "complete flash"
Linux video capture interface: v1.00
mice: PS/2 mouse device common for all mice
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (jffs2 filesystem).
Mounted devfs on /dev
Freeing unused kernel memory: 60k init
init started: BusyBox v1.00-pre3 (2003.12.04-12:22+0000) multi-cArgh. No free s
pace left for GC. nr_erasing_blocks is 0. nr_free_blocks is 0. (erasableempty: y
es, erasingempty: yes, erasependingempty: yes)
jffs2_reserve_space_gc of 196 bytes for garbage_collect_dnode failed: -28
Argh. No free space left for GC. nr_erasing_blocks is 0. nr_free_blocks is 0. (e
rasableempty: yes, erasingempty: yes, erasependingempty: yes)
jffs2_reserve_space_gc of 196 bytes for garbage_collect_dnode failed: -28
/etc/init.d/rcS: 7: cannot create /etc/network/ifstateArgh. No free space left f
or GC. nr_erasing_blocks is 0. nr_free_blocks is 0. (erasableempty: yes, erasing
empty: yes, erasependingempty: yes)
jffs2_reserve_space_gc of 196 bytes for garbage_collect_dnode failed: -28
: No space left on deviceArgh. No free space left for GC. nr_erasing_blocks is 0
. nr_free_blocks is 0. (erasableempty: yes, erasingempty: yes, erasependingempty
: yes)
jffs2_reserve_space_gc of 196 bytes for garbage_collect_dnode failed: -28

Argh. No free space left for GC. nr_erasing_blocks is 0. nr_free_blocks is 0. (e
rasableempty: yes, erasingempty: yes, erasependingempty: yes)
jffs2_reserve_space_gc of 196 bytes for garbage_collect_dnode failed: -28
Argh. No free space left for GC. nr_erasing_blocks is 0. nr_free_blocks is 0. (e
rasableempty: yes, erasingempty: yes, erasependingempty: yes)
jffs2_reserve_space_gc of 196 bytes for garbage_collect_dnode failed: -28
Using /lib/modules/2.4.22-dbox2/misc/event.o
Argh. No free space left for GC. nr_erasing_blocks is 0. nr_free_blocks is 0. (e
rasableempty: yes, erasingempty: yes, erasependingempty: yes)
jffs2_reserve_space_gc of 196 bytes for garbage_collect_dnode failed: -28
event: $Id: event.c,v 1.12 2003/09/30 05:45:38 obi Exp $
Argh. No free space left for GC. nr_erasing_blocks is 0. nr_free_blocks is 0. (e
rasableempty: yes, erasingempty: yes, erasependingempty: yes)
jffs2_reserve_space_gc of 196 bytes for garbage_collect_dnode failed: -28
Using /lib/modules/2.4.22-dbox2/misc/tuxbox.o
Argh. No free space left for GC. nr_erasing_blocks is 0. nr_free_blocks is 0. (e
rasableempty: yes, erasingempty: yes, erasependingempty: yes)
jffs2_reserve_space_gc of 196 bytes for garbage_collect_dnode failed: -28
Argh. No free space left for GC. nr_erasing_blocks is 0. nr_free_blocks is 0. (e
rasableempty: yes, erasingempty: yes, erasependingempty: yes)
jffs2_reserve_space_gc of 196 bytes for garbage_collect_dnode failed: -28
Using /lib/modules/2.4.22-dbox2/misc/dvb-core.o
Using /lib/modules/2.4.22-dbox2/misc/lcd.o
Argh. No free space left for GC. nr_erasing_blocks is 0. nr_free_blocks is 0. (e
rasableempty: yes, erasingempty: yes, erasependingempty: yes)
jffs2_reserve_space_gc of 196 bytes for garbage_collect_dnode failed: -28
ip: RTNETLINK answers: Network is unreachable
lcd.o: init lcd driver module
lcd.o: found KS0713/SED153X lcd interface
Argh. No free space left for GC. nr_erasing_blocks is 0. nr_free_blocks is 0. (e
rasableempty: yes, erasingempty: yes, erasependingempty: yes)
jffs2_reserve_space_gc of 196 bytes for garbage_collect_dnode failed: -28
Argh. No free space left for GC. nr_erasing_blocks is 0. nr_free_blocks is 0. (e
rasableempty: yes, erasingempty: yes, erasependingempty: yes)
jffs2_reserve_space_gc of 196 bytes for garbage_collect_dnode failed: -28
Argh. No free space left for GC. nr_erasing_blocks is 0. nr_free_blocks is 0. (e
rasableempty: yes, erasingempty: yes, erasependingempty: yes)
jffs2_reserve_space_gc of 196 bytes for garbage_collect_dnode failed: -28
Using /lib/modules/2.4.22-dbox2/misc/dbox2_i2c.o
Argh. No free space left for GC. nr_erasing_blocks is 0. nr_free_blocks is 0. (e
rasableempty: yes, erasingempty: yes, erasependingempty: yes)
jffs2_reserve_space_gc of 196 bytes for garbage_collect_dnode failed: -28
[i2c-8xx]: mpc 8xx i2c init
i2c-core.o: adapter PowerPC 8xx I2C adapter registered as adapter 0.
[i2c-8xx]: adapter: 0
Argh. No free space left for GC. nr_erasing_blocks is 0. nr_free_blocks is 0. (e
rasableempty: yes, erasingempty: yes, erasependingempty: yes)
jffs2_reserve_space_gc of 196 bytes for garbage_collect_dnode failed: -28
Using /lib/modules/2.4.22-dbox2/misc/dbox2_fp.o
Argh. No free space left for GC. nr_erasing_blocks is 0. nr_free_blocks is 0. (e
rasableempty: yes, erasingempty: yes, erasependingempty: yes)
jffs2_reserve_space_gc of 196 bytes for garbage_collect_dnode failed: -28
Argh. No free space left for GC. nr_erasing_blocks is 0. nr_free_blocks is 0. (e
rasableempty: yes, erasingempty: yes, erasependingempty: yes)
jffs2_reserve_space_gc of 196 bytes for garbage_collect_dnode failed: -28
i2c-core.o: driver DBox2 Frontprocessor driver registered.
Argh. No free space left for GC. nr_erasing_blocks is 0. nr_free_blocks is 0. (e
rasableempty: yes, erasingempty: yes, erasependingempty: yes)
jffs2_reserve_space_gc of 196 bytes for garbage_collect_dnode failed: -28
Argh. No free space left for GC. nr_erasing_blocks is 0. nr_free_blocks is 0. (e
rasableempty: yes, erasingempty: yes, erasependingempty: yes)
jffs2_reserve_space_gc of 196 bytes for garbage_collect_dnode failed: -28
i2c-core.o: client [DBox2 Frontprocessor client] registered to adapter [PowerPC
8xx I2C adapter](pos. 0).
Using /lib/modules/2.4.22-dbox2/misc/dbox2_fp_input.o
Argh. No free space left for GC. nr_erasing_blocks is 0. nr_free_blocks is 0. (e
rasableempty: yes, erasingempty: yes, erasependingempty: yes)
jffs2_reserve_space_gc of 196 bytes for garbage_collect_dnode failed: -28
Argh. No free space left for GC. nr_erasing_blocks is 0. nr_free_blocks is 0. (e
rasableempty: yes, erasingempty: yes, erasependingempty: yes)
jffs2_reserve_space_gc of 196 bytes for garbage_collect_dnode failed: -28
Using /lib/modules/2.4.22-dbox2/misc/avs.o
Argh. No free space left for GC. nr_erasing_blocks is 0. nr_free_blocks is 0. (e
rasableempty: yes, erasingempty: yes, erasependingempty: yes)
jffs2_reserve_space_gc of 196 bytes for garbage_collect_dnode failed: -28
Argh. No free space left for GC. nr_erasing_blocks is 0. nr_free_blocks is 0. (e
rasableempty: yes, erasingempty: yes, erasependingempty: yes)
jffs2_reserve_space_gc of 196 bytes for garbage_collect_dnode failed: -28
i2c-core.o: driver i2c audio/video switch driver registered.
Argh. No free space left for GC. nr_erasing_blocks is 0. nr_free_blocks is 0. (e
rasableempty: yes, erasingempty: yes, erasependingempty: yes)
jffs2_reserve_space_gc of 196 bytes for garbage_collect_dnode failed: -28
Argh. No free space left for GC. nr_erasing_blocks is 0. nr_free_blocks is 0. (e
rasableempty: yes, erasingempty: yes, erasependingempty: yes)
jffs2_reserve_space_gc of 196 bytes for garbage_collect_dnode failed: -28
i2c-core.o: client [STV6412] registered to adapter [PowerPC 8xx I2C adapter](pos
. 1).
Argh. No free space left for GC. nr_erasing_blocks is 0. nr_free_blocks is 0. (e
rasableempty: yes, erasingempty: yes, erasependingempty: yes)
jffs2_reserve_space_gc of 196 bytes for garbage_collect_dnode failed: -28
Using /lib/modules/2.4.22-dbox2/misc/saa7126.o
i2c-core.o: driver saa7126 registered.
Argh. No free space left for GC. nr_erasing_blocks is 0. nr_free_blocks is 0. (e
rasableempty: yes, erasingempty: yes, erasependingempty: yes)
jffs2_reserve_space_gc of 196 bytes for garbage_collect_dnode failed: -28
i2c-core.o: client [saa7126] registered to adapter [PowerPC 8xx I2C adapter](pos
. 2).
Argh. No free space left for GC. nr_erasing_blocks is 0. nr_free_blocks is 0. (e
rasableempty: yes, erasingempty: yes, erasependingempty: yes)
jffs2_reserve_space_gc of 196 bytes for garbage_collect_dnode failed: -28
Argh. No free space left for GC. nr_erasing_blocks is 0. nr_free_blocks is 0. (e
rasableempty: yes, erasingempty: yes, erasependingempty: yes)
jffs2_reserve_space_gc of 196 bytes for garbage_collect_dnode failed: -28
Argh. No free space left for GC. nr_erasing_blocks is 0. nr_free_blocks is 0. (e
rasableempty: yes, erasingempty: yes, erasependingempty: yes)
jffs2_reserve_space_gc of 196 bytes for garbage_collect_dnode failed: -28
Using /lib/modules/2.4.22-dbox2/misc/cam.o
Argh. No free space left for GC. nr_erasing_blocks is 0. nr_free_blocks is 0. (e
rasableempty: yes, erasingempty: yes, erasependingempty: yes)
jffs2_reserve_space_gc of 196 bytes for garbage_collect_dnode failed: -28
$Id: cam.c,v 1.28 2003/10/16 08:44:10 alexw Exp $
Argh. No free space left for GC. nr_erasing_blocks is 0. nr_free_blocks is 0. (e
rasableempty: yes, erasingempty: yes, erasependingempty: yes)
jffs2_reserve_space_gc of 196 bytes for garbage_collect_dnode failed: -28
[LCDFONT] initializing core...Argh. No free space left for GC. nr_erasing_blocks
is 0. nr_free_blocks is 0. (erasableempty: yes, erasingempty: yes, erasepending
empty: yes)
jffs2_reserve_space_gc of 196 bytes for garbage_collect_dnode failed: -28
Argh. No free space left for GC. nr_erasing_blocks is 0. nr_free_blocks is 0. (e
rasableempty: yes, erasingempty: yes, erasependingempty: yes)
jffs2_reserve_space_gc of 196 bytes for garbage_collect_dnode failed: -28
i2c-core.o: driver DBox2-CAM registered.
CAM: attaching CAM at 0x6e
i2c-core.o: client [DBOX2-CAM] registered to adapter [PowerPC 8xx I2C adapter](p
os. 3).
CAM: attached to adapter PowerPC 8xx I2C adapter
Argh. No free space left for GC. nr_erasing_blocks is 0. nr_free_blocks is 0. (e
rasableempty: yes, erasingempty: yes, erasependingempty: yes)
jffs2_reserve_space_gc of 196 bytes for garbage_collect_dnode failed: -28
Using /lib/modules/2.4.22-dbox2/misc/dvb_i2c_bridge.o
Argh. No free space left for GC. nr_erasing_blocks is 0. nr_free_blocks is 0. (e
rasableempty: yes, erasingempty: yes, erasependingempty: yes)
jffs2_reserve_space_gc of 196 bytes for garbage_collect_dnode failed: -28

[LCDFONT] adding font /share/fonts/micron.ttf...Argh. No free space left for GC.
nr_erasing_blocks is 0. nr_free_blocks is 0. (erasableempty: yes, erasingempty:
yes, erasependingempty: yes)
jffs2_reserve_space_gc of 196 bytes for garbage_collect_dnode failed: -28
Using /lib/modules/2.4.22-dbox2/misc/avia_napi.o
OK (Micron/Regular)
[LCDFONT] Intializing font cacheArgh. No free space left for GC. nr_erasing_bloc
ks is 0. nr_free_blocks is 0. (erasableempty: yes, erasingempty: yes, erasependi
ngempty: yes)
jffs2_reserve_space_gc of 196 bytes for garbage_collect_dnode failed: -28
...
[LCDFONT] FTC_Face_Requester (Micron/Regular)
$Id: avia_napi.c,v 1.16 2003/07/24 01:59:22 homar Exp $
DVB: registering new adapter (C-Cube AViA GTX/eNX with AViA 500/600).
i2c-core.o: driver DVB I2C bridge registered.
i2c-core.o: client [dvb] registered to adapter [PowerPC 8xx I2C adapter](pos. 4)
.
dvb_i2c_bridge: enabled DVB i2c bridge to PowerPC 8xx I2C adapter
Argh. No free space left for GC. nr_erasing_blocks is 0. nr_free_blocks is 0. (e
rasableempty: yes, erasingempty: yes, erasependingempty: yes)
jffs2_reserve_space_gc of 196 bytes for garbage_collect_dnode failed: -28
Using /lib/modules/2.4.22-dbox2/misc/cam_napi.o
Argh. No free space left for GC. nr_erasing_blocks is 0. nr_free_blocks is 0. (e
rasableempty: yes, erasingempty: yes, erasependingempty: yes)
jffs2_reserve_space_gc of 196 bytes for garbage_collect_dnode failed: -28
$Id: cam_napi.c,v 1.8 2003/09/30 05:45:34 obi Exp $
Argh. No free space left for GC. nr_erasing_blocks is 0. nr_free_blocks is 0. (e
rasableempty: yes, erasingempty: yes, erasependingempty: yes)
jffs2_reserve_space_gc of 196 bytes for garbage_collect_dnode failed: -28
Using /lib/modules/2.4.22-dbox2/misc/dbox2_fp_napi.o
Argh. No free space left for GC. nr_erasing_blocks is 0. nr_free_blocks is 0. (e
rasableempty: yes, erasingempty: yes, erasependingempty: yes)
jffs2_reserve_space_gc of 196 bytes for garbage_collect_dnode failed: -28
Argh. No free space left for GC. nr_erasing_blocks is 0. nr_free_blocks is 0. (e
rasableempty: yes, erasingempty: yes, erasependingempty: yes)
jffs2_reserve_space_gc of 196 bytes for garbage_collect_dnode failed: -28
Argh. No free space left for GC. nr_erasing_blocks is 0. nr_free_blocks is 0. (e
rasableempty: yes, erasingempty: yes, erasependingempty: yes)
jffs2_reserve_space_gc of 196 bytes for garbage_collect_dnode failed: -28
Argh. No free space left for GC. nr_erasing_blocks is 0. nr_free_blocks is 0. (e
rasableempty: yes, erasingempty: yes, erasependingempty: yes)
jffs2_reserve_space_gc of 196 bytes for garbage_collect_dnode failed: -28
Argh. No free space left for GC. nr_erasing_blocks is 0. nr_free_blocks is 0. (e
rasableempty: yes, erasingempty: yes, erasependingempty: yes)
jffs2_reserve_space_gc of 196 bytes for garbage_collect_dnode failed: -28
Argh. No free space left for GC. nr_erasing_blocks is 0. nr_free_blocks is 0. (e
rasableempty: yes, erasingempty: yes, erasependingempty: yes)
jffs2_reserve_space_gc of 196 bytes for garbage_collect_dnode failed: -28
Argh. No free space left for GC. nr_erasing_blocks is 0. n


ich weiß auch nicht was falsch ist. Der Mir dieses Image gegeben hat, hat nur gesagt das läuft auf seinem Philips sehr stabil und darum wollte ich es mal ausprobieren.

 

Wenn das ein "Flash Versuch" war dann liegts hier dran:

winken
Gruß Gorcon

 

und was soll das heißen? durchein


MfG Glums winken

 

http://www.dietmar-h.net/flashprob.html#boot_net_failed

 

Das habe ich alles ausprobiert klappt leider auch nicht. Es klappte ja sonst immer ich habe bestimmt schon 30 Image ausprobiert und da zeigte er nie diesen Fehler. Es steht unten aber noch als Hilfe vielleicht für euch Boot-Vorgang erkannt, warte auf PPCBoot..... durchein

 

Kann das sein das die Box defekt ist weil ich habe jetzt alles ausprobiert was ich gelesen und selber wuste aber irgendwie will er nicht in den Bootmodus gehen, ich habe soger alles neu Installiert Treiber und Netzwerkkate aber es getht immer noch nicht.

 

Kann ich vielleich das IMage was jetzt drauf ist kaputt machen per FTP weil vielleicht das Image ne verrieglung hat? durchein

MFG Glums