1. Cookies optimieren die Bereitstellung unserer Dienste. Mit der Nutzung unserer Dienste erklärst Du dich damit einverstanden, dass wir Cookies verwenden. Weitere Informationen
    Information ausblenden
  2. Willkommen im Forum von DIGITAL FERNSEHEN - dem führenden Portal für digitales Fernsehen, Medien und Entertainment. Wenn du hier neu bist, schau dich ruhig etwas um und melde dich an, um am Forengeschehen teilnehmen zu können.
    Information ausblenden

cinergy t2 works only after about 5min after pc startup

Dieses Thema im Forum "Terratec" wurde erstellt von buzzbum, 8. Februar 2008.

  1. buzzbum

    buzzbum Neuling

    Registriert seit:
    8. Februar 2008
    Beiträge:
    7
    Anzeige
    Hi, i have an asus notebook and my cinergy t2 correctly receive channels only after about 5 minutes from pc startup or from hibernation :confused:
    It's like there is a lot of noise that goes away gradually.

    Hallo, ich habe ein Notebook asus und meine cinergy t2 korrekt erhalten Kanäle erst nach etwa 5 Minuten vom St. Start oder aus dem Ruhezustand

    i have TerraTec Home Cinema: 5.34.00.219
    and bda driver: 2.3.0.26 (problem also with 2.3.0.24)
     
    Zuletzt bearbeitet: 8. Februar 2008
  2. smk_t2

    smk_t2 Junior Member

    Registriert seit:
    23. Mai 2006
    Beiträge:
    142
    Ort:
    Berlin
    Technisches Equipment:
    Cinergy T2
    AW: cinergy t2 works only after about 5min after pc startup

    Hi Buzzbumm,

    First, change to the latest THC Version 5.43 and try again.
    "Noise" in the case of DVB-T is not possible, because it is a digital signal, which can be received or not.

    Best regards, Sascha
     
  3. buzzbum

    buzzbum Neuling

    Registriert seit:
    8. Februar 2008
    Beiträge:
    7
    AW: cinergy t2 works only after about 5min after pc startup

    i mean that the signal is very interrupted. Noise concept is applicable also for digital signals. In dvb-t if there is noise the image is interrupted or even doesn't exists.
     
  4. hopper

    hopper Lexikon

    Registriert seit:
    3. April 2003
    Beiträge:
    20.842
    Ort:
    San Francisco | Sunnyvale
    AW: cinergy t2 works only after about 5min after pc startup

    Might be heat related if it works fine the first minutes.
     
  5. buzzbum

    buzzbum Neuling

    Registriert seit:
    8. Februar 2008
    Beiträge:
    7
    AW: cinergy t2 works only after about 5min after pc startup

    it "doesn't" work in the first minutes...it's a software/driver/usb port problem because i remember that originally the card worked well with the same laptop (i bought the cinergy 2 years ago)
     
  6. hopper

    hopper Lexikon

    Registriert seit:
    3. April 2003
    Beiträge:
    20.842
    Ort:
    San Francisco | Sunnyvale
    AW: cinergy t2 works only after about 5min after pc startup

    Ups, yeah I read that. Sorry.

    It might still be heat related. Is the box getting hot? Is it always 5 minutes and after that no further issues? What happens if you get a signal for 2-3 minutes then immediatly reboot and start the software, is the signal still ok?
     
  7. buzzbum

    buzzbum Neuling

    Registriert seit:
    8. Februar 2008
    Beiträge:
    7
    AW: cinergy t2 works only after about 5min after pc startup

    No, the signal isn't ok. You have to wait again about 5 minutes. It's like something disturbs the data transfer in the usb port for the first minutes of pc startup and then goes away.
    Isn't necessary to start the program. I wait 5-10 minutes after pc startup and then i start home cinema and it works correctly.
     
  8. hopper

    hopper Lexikon

    Registriert seit:
    3. April 2003
    Beiträge:
    20.842
    Ort:
    San Francisco | Sunnyvale
    AW: cinergy t2 works only after about 5min after pc startup

    Interesting.
     
  9. smk_t2

    smk_t2 Junior Member

    Registriert seit:
    23. Mai 2006
    Beiträge:
    142
    Ort:
    Berlin
    Technisches Equipment:
    Cinergy T2
    AW: cinergy t2 works only after about 5min after pc startup

    This phenomenon is not called "noise", there is nothing like "digital noise", any noise will come from the D/A conversion, perhaps you mean artefacts. You should distinguish any terrestrial effect from effects concerning the signal transfer within the pc (eg. usb port). If you have these effects any time you boot your computer, you will have to check what's the system doing in this period of time. Have a look in your tasks-list, check the autorun-section etc. There might be a very time consuming programme (indexer?) which does not leave enough proc-power for THC. Is the sound also interrupted? What happens if you do a recording (transport stream)?

    Tell us more about your system configuration.

    Best regards, Sascha
     
  10. buzzbum

    buzzbum Neuling

    Registriert seit:
    8. Februar 2008
    Beiträge:
    7
    AW: cinergy t2 works only after about 5min after pc startup

    Ok, you're right. Anyway i wanted to give an idea of the type of signal corruption i have . It's like to have a noisy antenna signal, but the problem is somewhere in the system. I will check your suggestions and will report more.
     

Diese Seite empfehlen