Viaccess 3 -- TNT SAT Frankreich

Anzeige

2018/03/23 13:37:45 00000000 s >> OSCam << cardserver log switched, version 1.20-unstable_svn, build r11399 (arm-linux-gnueabihf)
2018/03/23 13:37:45 00000000 s (main) System name = Linux
2018/03/23 13:37:45 00000000 s (main) Host name = gbquad4k
2018/03/23 13:37:45 00000000 s (main) Release = 4.1.20-1.9
2018/03/23 13:37:45 00000000 s (main) Version = #1 SMP Wed Feb 14 08:57:19 CET 2018
2018/03/23 13:37:45 00000000 s (main) Machine = armv7l
2018/03/23 13:37:45 00000000 s (main) Stb model = gbquad4k
2018/03/23 13:37:45 00000000 s (main) Stb boxtype = gigablue
2018/03/23 13:37:45 00000000 s (main) creating pidfile /tmp/.oscam/oscam.pid with pid 27108
2018/03/23 13:37:45 00000000 s (config) services reloaded: 0 services freed, 13 services loaded, rejected 0
2018/03/23 13:37:45 00000000 s (config) userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2018/03/23 13:37:45 00000000 s (main) signal handling initialized
2018/03/23 13:37:45 00000000 s (config) 10 provid's loaded
2018/03/23 13:37:45 00000000 s (config) 244 service-id's loaded in 1 ms
2018/03/23 13:37:45 00000000 s (config) 55 tier-id's loaded
2018/03/23 13:37:45 00000000 s (reader) sci1 [internal] creating thread for device /dev/sci1
2018/03/23 13:37:45 00000000 s (stat) loadbalancer: could not open /tmp/.oscam/oscam.stat for reading (errno=2 No such file or directory)
2018/03/23 13:37:45 00000000 s (emmcache) loading emmcache disabled since no reader is using it!
2018/03/23 13:37:45 00000000 s (emmcache) loading emmstats disabled since no reader is using it!
2018/03/23 13:37:45 00000000 s (anticasc) anti cascading disabled
2018/03/23 13:37:45 1F50FD43 c (client) plain dvbapi-client granted (mybox, au=auto (1 reader))
2018/03/23 13:37:45 13CDEF6C r (reader) sci1 [internal] Reader initialized (device=/dev/sci1, detect=cd, mhz=357, cardmhz=357)
2018/03/23 13:37:45 13CDEF6C r (reader) sci1 [internal] Reader sci internal, detected box type: gigablue
2018/03/23 13:37:45 1F50FD43 c (dvbapi) Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 1 maximum amount of possible filters is 32 (oscam limit is 32)
2018/03/23 13:37:45 479DBF20 h (webif) webif: decompressed 176858 bytes back into 435000 bytes
2018/03/23 13:37:45 479DBF20 h (webif) HTTP Server running. ip=0.0.0.0 port=83
2018/03/23 13:37:46 13CDEF6C r (reader) sci1 [internal] card detected
2018/03/23 13:37:47 13CDEF6C r (reader) sci1 [internal] ATR: 3F 77 18 00 00 C2 EB 45 02 6C 90 00

 

@sjaakie: poste bitte mal deine Oscam Readerconfig

 

Der Init der Tntsat fehlt nach wie vor. Der würde genau an deinem log ansetzen.

 

# Configs created by OscamSmartcard 2.0
[global]
logfile = /tmp/.oscam/oscam.log
logduplicatelines = 1
clienttimeout = 5000
unlockparental = 1
nice = -1
maxlogsize = 128
waitforcards = 0
dropdups = 1
block_same_ip = 0
lb_mode = 1
lb_save = 500
lb_min_ecmcount = 3
lb_savepath = /tmp/.oscam/oscam.stat
ecmfmt = c:s #l
failbantime = 15
failbancount = 3
suppresscmd08 = 1
[dvbapi]
enabled = 1
au = 1
user = mybox
read_sdt = 1
write_sdt_prov = 1
boxtype = dreambox
[webif]
httpport = 83
httphelplang = de
httprefresh = 15
httpallowed = 127.0.0.1,192.168.0.1-192.168.255.255,10.0.0.1-10.255.255.255

 

Wie kann ich die V5 Karte jetzt doch noch zum laufen bringen ?

 

Ich muss dafür erstmal einen vernünftigen Init der Karte sehen. Ich Poste gleich mal einen, wie der aussehen sollte mit der entscheidenden Stelle.

 

Sorry Eheimz
Aber ich kenn mich damit leider überhaupt nicht aus

 

Schau mal bitte, ob du das hast...

Das müsste im Log bei dir auftauchen. Relativ zu ende des initialisieren.

 

Ich denke der oscam reader ist unvollständig. Leider wurde nur die config gepostet.

 

Stimmt. Das sehe ich auch gerade. Ein "normaler" User benötigt den ganzen Kram mit Loadbalancer eh nicht. Daran merkt man schon, dass die Configs ganz toll sind...