bekomme kein sauberes Image drauf!!

Anzeige

Ja erstmal zum Anfang ich habe nicht so wirklich bis jetzt die große Ahnung also bitte nicht gleich schimpfen!! breites_

Also so endet mein flashen:


debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: BMon V1.0 mID 01
debug: feID 7a gtxID 0b
debug: fpID 5a dsID 01-8a.77.05.07.00.00-df
debug: HWrev X5 SWrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed

Flash-FS bootstrap loader (v1.5)

Found Flash-FS superblock version 3.1
Found file /root/platform/nokia-dbox2/kernel/os in Flash-FS
debug: Got Block #0044

will verify ELF image, start= 0x800000, size= 200660
verify sig: 262
Branching to 0x40000


PPCBoot 1.1.6 (TuxBox) (Nov 16 2002 - 10:23:37)

CPU: PPC823ZTnnA at 67.200 MHz: 2 kB I-Cache 1 kB D-Cache
*** Warning: CPU Core has Silicon Bugs -- Check the Errata ***
Watchdog enabled
Board: DBOX2, Nokia
I2C: ready
DRAM: 32 MB
FLASH: 8 MB
Scanning JFFS2 FS: ........ done.
LCD: ready
FB: loading - ready
In: serial
Out: serial
Err: serial

Options:
1: framebuffer on ttyS0
2: framebuffer on fb0
3: framebuffer on null
Select option (1-3), other keys to stop autoboot: 0
...............................................................
Un-Protected 63 sectors
### FS (jffs2) loading 'vmlinuz' to 0x100000
### FS load compleate: 647481 bytes loaded to 0x100000
## Booting image at 00100000 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 647417 Bytes = 632 kB = 0 MB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Linux version 2.4.19 (genial) #12 Sam Nov 16 19:45:12 CET 2002
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: root=/dev/mtdblock/2 rw console=ttyS0
Decrementer Frequency = 252000000/60
mpc8xx-wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)
mpc8xx-wdt: keep-alive trigger activated (PITC: 0x1000)
Console: colour dummy device 80x25
Calibrating delay loop... 66.76 BogoMIPS
Memory: 30820k available (1136k kernel code, 344k data, 68k init, 0k highmem)
Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
devfs: v1.12a (20020514) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
JFFS2 version 2.1. (C) 2001, 2002 Red Hat, Inc., designed by Axis Communications
AB.
i2c-core.o: i2c core module
CPM UART driver version 0.03
ttyS00 at 0x0280 is a SMC
ttyS01 at 0x0380 is a SMC
pty: 256 Unix98 ptys configured
eth0: CPM ENET Version 0.2 on SCC2, 00:50:9c:14:7c:95
D-Box 2 flash driver (size->0x800000 mem->0x10000000)
Using word write method
Creating 5 MTD partitions on "D-Box 2 flash memory":
0x00000000-0x00020000 : "BR bootloader"
0x00020000-0x00040000 : "ppcboot (flfs)"
0x00040000-0x00800000 : "root (jffs2)"
0x00020000-0x00800000 : "flash without bootloader"
0x00000000-0x00800000 : "complete flash"
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (jffs2 filesystem).
Mounted devfs on /dev
Freeing unused kernel memory: 68k init
init started: BusyBox v0.61.pre (2002.09.22-12:09+0000) multi-caUsing /lib/modu
les/2.4.19/misc/i2c-8xx.o
[i2c-8xx]: mpc 8xx i2c init
i2c-core.o: adapter registered as adapter 0.
[i2c-8xx]: adapter: 0
Using /lib/modules/2.4.19/misc/info.o
i2c-core.o: driver FOR_PROBE_ONLY registered.
i2c-core.o: driver unregistered: FOR_PROBE_ONLY
Using /lib/modules/2.4.19/kernel/drivers/input/input.o
Using /lib/modules/2.4.19/kernel/drivers/input/evdev.o
Using /lib/modules/2.4.19/misc/event.o
event: init ...
Using /lib/modules/2.4.19/misc/saa7126.o
i2c-core.o: driver i2c saa7126 driver registered.
i2c-core.o: client [i2c saa7126 chip] registered to adapter [](pos. 0).
Using /lib/modules/2.4.19/misc/avs.o
i2c-core.o: driver i2c audio/video switch driver registered.
i2c-core.o: client [CXA2092] registered to adapter [](pos. 1).
Using /lib/modules/2.4.19/misc/fp.o
i2c-core.o: driver DBox2 Frontprocessor driver registered.
i2c-core.o: client [DBox2 Frontprocessor client] registered to adapter [](pos. 2
).
fp.o: clear_wakeup_timer [40][30]
Using /lib/modules/2.4.19/misc/dvb_demux.o
Using /lib/modules/2.4.19/misc/dvbdev.o
Using /lib/modules/2.4.19/misc/avia.o
Using /lib/modules/2.4.19/misc/dmxdev.o
Using /lib/modules/2.4.19/misc/cam.o
der moment ist gekommen...
AVIA: $Id: avia_core.c,v 1.32 2002/09/24 17:50:19 Jolt Exp $
Using /lib/modules/2.4.19/misc/dvb_frontend.o
i2c-core.o: driver DBox2-CAM registered.
CAM: attaching CAM at 0x6e
i2c-core.o: client [DBOX2-CAM] registered to adapter [](pos. 3).
CAM: attached to adapter
Using /lib/modules/2.4.19/misc/lcd.o
lcd.o: init lcd driver module
lcd.o: found KS0713/SED153X lcd interface on 1
write 1 event's ...
write 1 event's ...
[FONT] initializing core...
[FONT] adding font /share/fonts/micron_bold.ttf...OK (Micron/Bold)
[FONT] Intializing font cache...
Using /lib/modules/2.4.19/misc/avia_gt.o
avia_gt_core: $Id: avia_gt_core.c,v 1.23 2002/10/05 15:01:12 Jolt Exp $
avia_gt_core: autodetecting chip type... AViA GTX found
avia_gt_gtx: $Id: avia_gt_gtx.c,v 1.17 2002/09/15 18:06:26 Jolt Exp $
avia_gt_accel: $Id: avia_gt_accel.c,v 1.8 2002/10/13 21:16:15 Jolt Exp $
avia_gt_core: masking unhandled irq reg 1 bit 11
avia_gt_core: masking unhandled irq reg 1 bit 13
avia_gt_dmx: $Id: avia_gt_dmx.c,v 1.134 2002/09/21 00:00:08 Jolt Exp $
avia_gt_dmx: Successfully loaded ucode VB1.7
avia_gt_core: masking unhandled irq reg 0 bit 6
avia_gt_dmx: warning, misaligned queue 0 (is 0x32A00, size 65536), aligning...
avia_gt_gv: $Id: avia_gt_gv.c,v 1.25 2002/10/11 09:57:54 Jolt Exp $
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_pcm: $Id: avia_gt_pcm.c,v 1.19 2002/10/03 11:12:42 thegoodguy Exp $
avia_gt_capture: $Id: avia_gt_capture.c,v 1.22 2002/08/22 13:39:33 Jolt Exp $
avia_gt_pig: $Id: avia_gt_pig.c,v 1.28 2002/08/22 13:39:33 Jolt Exp $
avia_gt_ir: $Id: avia_gt_ir.c,v 1.19 2002/08/22 13:39:33 Jolt Exp $
avia_gt_vbi: $Id: avia_gt_vbi.c,v 1.17 2002/10/05 15:01:12 Jolt Exp $
avia_gt_core: Loaded AViA eNX/GTX driver
Using /lib/modules/2.4.19/misc/dvb.o
Using /lib/modules/2.4.19/misc/dvb.o
insmod: A module named dvb already exists
Init VES1820
Using /lib/modules/2.4.19/misc/ves1820.o
$Id: ves1820.c,v 1.36 2002/10/21 18:43:16 Jolt Exp $
i2c-core.o: driver VES1820 DVB-C Demodulator registered.
VES1820: attaching VES1820 at 0x10
i2c-core.o: client [VES1820] registered to adapter [](pos. 4).
VES1820: attached to adapter

Using /lib/modules/2.4.19/misc/avia_gt_napi.o
avia_gt_napi: $Id: avia_gt_napi.c,v 1.130 2002/09/18 15:57:24 Jolt Exp $
avia_gt_napi: hardware section filtering disabled.
Using /lib/modules/2.4.19/misc/avia_gt_vbi.o
avia_gt_vbi: $Id: avia_gt_vbi.c,v 1.16 2002/08/22 13:39:33 Jolt Exp $
avia_gt_vbi: got demux C-Cube - AViA eNX/GTX
Using /lib/modules/2.4.19/misc/avia_gt_fb.o
avia_gt_fb: $Id: avia_gt_fb_core.c,v 1.36 2002/08/22 13:39:33 Jolt Exp $
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
Console: switching to colour frame buffer device 82x32
avia_gt_fb: fb0: AViA eNX/GTX Framebuffer frame buffer device
Using /lib/modules/2.4.19/misc/avia_gt_proc.o
avia_gt_proc: $Id: avia_gt_proc.c,v 0.7 2002/10/12 13:38:30 NoClue $
CXA2092 found
CXA2092 found
cdkVcInfo $Id: cdkVcInfo.c,v 1.0 2002/09/26 20:48:26 alexW Exp $

cp: /var/tuxbox/config/zapit/zapit.ok: No such file or directory
[CBasicClient] connect failed.
/tmp/sectionsd.sock: No such file or directory
$Id: sectionsd.cpp,v 1.139 2002/10/15 20:39:47 woglinde Exp $
caching 72 hours
events are old 60min after their end time
[camd] ca system id: 1722
$Id: zapit.cpp,v 1.268 2002/10/28 22:47:21 thegoodguy Exp $

[zapit] Using /bin/emu/camd for Emu mode.
cp: /var/keys/nagra: No such file or directory
cp: /var/keys/seca: No such file or directory
cp: /var/keys/via: No such file or directory
[camd] no card is in slot #2
[camd] a card is in slot #1
[getservices.cpp] going to parse cable Telekom/Ish
[zapit] LoadServices: success
[zapit] reading Bouquets .........
[zapit] Found 9 bouquets.
[zapit] channels have been loaded succesfully
[camd] no card is in slot #2
[camd] a card is in slot #1
[nhttpd] Neutrino HTTP-Server starting..
Killed
Network LCD-Driver $Id: lcdd.cpp,v 1.57 2002/10/17 10:16:35 thegoodguy Exp $

[lcdd] time-skin not found -> using default...
[lcdd] weekday-skin not found -> using default...
[lcdd] date-skin not found -> using default...
[lcdd] month-skin not found -> using default...
[lcdd] load config
[FONT] initializing core...
[FONT] adding font /share/fonts/micron.ttf...OK (Micron/Regular)
[FONT] Intializing font cache...
[FONT] FTC_Face_Requester (Micron/Regular)
Controld $Id: controld.cpp,v 1.78 2002/11/05 19:47:21 obi Exp $

[controld] Boxtype detected: (01, 1, 1, Nokia)
set event: 00000009
[neutrino] NeutrinoNG $Id: neutrino.cpp,v 1.344 2002/10/16 16:25:24 gbox-Version
Exp $

[neutrino] New Options : neutrino [-key] (Keyeditor) [-gbox] (gboxMenu) [-cug] (
Keyeditor+gboxMenu)
[neutrino] frameBuffer Instance created
[neutrino] vcrControl Instance created
1024k video mem
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
[neutrino] enable flash
[neutrino] Software update enabled
[neutrino] gbox Menu / gbox Info / Keyedit Feature enabled !
IP : 192.168.0.100
Netmask : 255.255.255.0
Broadcast: 192.168.0.255
Gateway : 192.168.0.1
[neutrino] menue setup
[CHTTPUpdater] HTTP-Basepath:
[CHTTPUpdater] Image-Filename: cdk.cramfs
[CHTTPUpdater] Version-Filename: cdk.cramfs.version
loading locales: scandir: No such file or directory
[neutrino] control event register
[neutrino] sectionsd event register
[neutrino] zapit event register
[neutrino] timerd event register
[CFrontend::setFrontend] freq 426000
[CPlugins] Dir: /lib/tuxbox/plugins/
[CPlugins] 12 plugins found...
[CFrontend::getEvent] timeout
zap failed!
initial zap failed - rezap
[CFrontend::setFrontend] freq 426000
[CFrontend::getEvent] timeout
zap failed!

also irgindwie nicht so sáuber oder?? durchein
was mache ich falsch???

Danke für Eure Hilfe!!

entt&aum

 

"boot net failed"

Netzwerkproblem.
Entweder hier im Forum suchen oder:

www.dietmar-h.net (Probleme beim Flashen)

 

ja jetzt habe auch ich es kapiert
alles super Danke für die schnelle Hilfe!!!

 

Zitat:[neutrino] New Options : neutrino [-key] (Keyeditor) [-gbox] (gboxMenu) [-cug] (
Keyeditor+gboxMenu :Zitat Ende

Vor allem ein legales Image flashen!

cu Tramp88

 

Lass ihn doch. Wenn es ihm rein sexuell irgend etwas bringt... winken breites_ breites_ breites_

Ist halt schon blöd, wenn ein Vogel, der nicht fliegen kann, mittlerweile auch das Laufen verlernt hat...

Gag

 

was soll das ich habe hier eine Vernünftige frage
gestellt!!
wenn mir das rein sexuell was bringt??
super Antwort!! Beifall boah!

 

Das liegt wohl an Deinem illegalen Image,
womit Du zwar zum Glück nicht Premiere sehen
aber die anderen digitalen Pakete empfangen/entschlüsseln kannst.
Natürlich hast Du das nicht gewußt
und es war sicher ein guter Freund der Dir
dieses Image mpfahl.

tz tz tz

Daher diese Aussage,die warum auch immer,Verwunderung bei Dir hervor rief.

<small>[ 12. November 2003, 17:53: Beitrag editiert von: Lechuk ]</small>

 

@ kartg
Deine Frage wurde doch wahrheitsgemäß und konkret beantwortet!

Also was willst du?
Okay, du kannst nicht wissen, das Begriffe wie Emu, gbox, Keyeditor und andere aus der Mosc Szene stammenden Facts hier nicht gern gesehen sind... winken
Einfach drüber weg sehen und ruhig bleiben, es gibt halt immer wieder Leute, die sich *daran* aufgeilen und dabei mit erschreckender Regelmäßigkeit beleidigend/ausfallend und was weiß ich nicht alles werden. entt&aum

 

och was ist ihm denn?

Vieleicht hilft es ihm,wenn ich ihm eine monatliche
Spende zukommen lasse,dann braucht er keine EMU's mehr und kann sich legal anmelden?

 

Fängst du auch schon *so* an? ver&auml Ich kann dir gern ein paar Abschnitte aus dem Memberbereich von Premiere quoten, meine Kundennummer/Kartennummern zukommen lassen oder ähnliche Sachen, die nur ein Abouser kennt!

Mich kotzt halt nur die Scheinheiligkeit an, die hier onboard zutage gelegt wird! w&uuml;t Dabei machen gerade die Mod`s die blödesten Sprüche btw sind immer vornedran! Dieses messen mit zweierlei Maßstab sux - aber gewaltig! w&uuml;t